THE UNDER CONSTRUCTION RAIL BRINGS UP TO 50% TIME SAVING! A successful combination (symbiosis) of the positive properties of aluminum and weather-resistant wood. The stable and distortion-free aluminum allows absolutely flat substructure, which eliminates costly counter batten construction. The integrated timber ensures long-lasting hold of the claimed on train and shear bolts. Thus, the often occurring problems such as "be easy" or "pull" the attachment screws professionally solved permanently on aluminum.SymbioFix® SFT provides the perfect constructive wood protection! The 5 mm distance between mounting SymbioFix® SFT and hallway ensures perfect ventilation of the terrace and thus for long life of the floorboards while the optimum freedom of movement in shear (due to the swelling and shrinking processes of the planks) claimed screws ensures.SymbioFix® SFT is not suitable for visible screw the decking, as well as prefabricated elements and enables an extremely fast and easy set up of terraced substructure. We recommend for professional, non-visible screw DielenFix®SymbioFix® SFT is ideal for visible screw the decking. We recommend for professional continuous screw L-BohrFix® MB.For visible screwing the terrace covering the boards are pre-drilled.For aluminum substructure the deck covering the SymbioFix®Bohrer SFB drill 6 mm. SymbioFix® SFT, also ideal to combine with JustiFix® II JK SF.The most immediate result of the special lateral ventilation ducts jet effect makes them suitable for wicking in SymbioFix® SFT rail.

Effective cleaner for WPC / BPC decking and all other wood-plastic-composites.Highly effective, slightly alkaline special cleaner for removing organic and inorganic contaminants in the exterior.Ideal for intensive cleaning of WPC / BPC decking and all other wood-plastic composites (e.g. garden furniture, fencing) in the exterior.Application: Dilute concentrate in mix ratio 1:10 to 1:20 with water. Apply on the contaminanted surfaces, remove the dirt with a scrubbing brush and then rinse with clear water. Test the surface on compatibility in each case!Available in 1, 5 and 10 litre.1 Litre covers approx. 10 - 50 m2

The right brush for any project Large surfaces or small corners - the Flat Brush plastic bristles are suitable for all dimensions and ensure easy application of paints, oils, waxes or stains. The wooden handle, which is comfortable to hold, makes for easy handling of the Flat Brush . Benefits For the application of water and oil-based paintsSizes: 30/50/60/100 mm widthEasy to clean paintbrushesFor an even application of paint Small, medium, large - we have the right Flat Brush for any project. The products sit comfortably in the hand and ensure an even application of paint. Due to their excellent processing and the high quality synthetic bristles, the brushes are particularly durable and can be used for all SAICOS coatings with oil and water bases. They also ensure an especially even stoke result. This is also guaranteed by the working widths of the Flat Brush from 30 to 100 mm, which means that any surface size can be optimally treated. Correct cleaning of paints, oils, waxes and stains is important so you can take full advantage of the Flat Brush. If these paint residues remain in the Flat Brush , the bristles can come loose or stick together so that it is no longer possible to work evenly. Water-based paint residues can be easily cleaned with water. For oil-based paints or stains, we recommended SAICOS Brush Cleaner. Using the Flat Brushfor coating is therefore only recommended when perfectly clean to achieve a perfect result. The right brush Every application requires a different Flat Brush. That is why we offer models in different sizes. This means you can do anything, from precise detailed work to the treatment of large areas. Due to the special processing of the plastic bristles, they can absorb a particularly large amount of material, making work effortless. Wood paints Our paint coatings for various types of wood can be used very easily with the various Flat Brushes. As they are coordinated to one another, they complement each other both in terms of uniformity and in terms of the colour result. This means that even application is possible and you save yourself repeated painting and time. Applying stains When applying a stain, it depends on the individual product whether pretreatment (impregnation / priming) is necessary. Many SAICOScoatings are easy to clean and paint over when renovating. (Please note the respective technical data sheets for the products.) In the case of third-party paints, it is generally advisable to remove remaining paints in order to achieve an ideal result. Remnants of old paints could also significantly affect the protection of the product. To use: Apply generously, quickly and in layers in the wood grain direction, avoid overlapping of the layers of paint.

For quick and effective wet cleaning and treatment of floors First clean, then treat. This also applies to wooden floors. The three-part maintenance set contains special cloths for cleaning and treating stressed floors. Combined with SAICOS Ecoline products, the maintenance set gives your floor a new shine. Benefits 3-piece complete set: Telescopic handle, 1 large cleaning cloth, 1 small cleaning clothWashable at 60°The wiper for the environmentally-conscious Ecoline products The large cleaning cloth is suitable for cleaning all wipeable surfaces such aswood, cork, tile, linoleum and PVC floors. SAICOS EcolineWash Care Concentrate, SAICOS Ecoline Magic Cleaner and SAICOS Ecoline Refresher can be used. The small cleaning cloth was specially developed for even application of SAICOS Ecoline Wax Care. The wax can be poured directly on the floor and spread with the dry cloth.The extendable telescopic handle can be adjusted to any body size. It can be adjusted from 0.90 - 1.40 m and is delivered with 2 special towels. The towels can also be ordered separately in a set of 2 (item number 8188Eco).

Meets the needs of modern architecture – the innovative long-term protection in three attractive silver metallic colour tones! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony elements, screens and fences etc.Natural Oil Woodstain Effect is water-repellent and extremely weatherproof and UV-stable. The microporous surface also contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, generally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Each PU contains the UNIA1 system screws 4.2 x 17 mm or 4.2 x 22 mm, 4.2 x 28 mm, 1 STK HELPO assembly aid and assembly instructions required for assembly.Regardless of the board geometry this is implemented quickly with the DILA decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging.Fixing: concealed systemFixing type: sliding and fixed pointSpace distance: selectableDecking board: all soft and hardwoodsBoard length: all board lengthsBoard repl.: possible Material: A2 Stainless steel / black Special feature: system screws includedDILA2 quantity calculation:We recommend the following auxiliary formula to determine the required quantity:Total running meters of the substructure / board width including joint x 2Using the example of a terrace with 15 running meters of substructure, board width 144 mm, joint 6 mm:15: 0.150 x 2 = 200 piece

Innovative Osmo finishing system – ideal for coating or renovating interior wood panelling! Transparent or opaque, satin, for the interiorHighly recommended for furniture and children's toys, walls, ceilings, doors, beams and edge-glued panelsInterior Wax is resistant to dirt, water and abrasion, and smoothens the surface.Fast drying – 2 coats in one dayNumber of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Easily removes paint residues from painting tools After the work is done, you have the annoying job of cleaning the tools. This is quick and easy thanks to SAICOS Brush Cleaner. Paint residues can be removed and brushes and rollers look new again. Benefits Cleans tools from SAICOS wood coatings and other oil or synthetic resin paintsGently removes escaping resinsCan also be used as a thinnerLow in odourBenzene-freeSuitable as a cleaner and thinner SAICOS Brush Cleaner professionally cleans oil and wax-based wood coatings and solvent-based oil or synthetic resin paints from tools. It is low in odour and even removes escaping resin from the wood surface without attacking it. It can also be used as a thinner for thickened oil, wax or synthetic resin paints based on solvents.

Professional care for oiled wooden surfaces SAICOS Professional Care Oil is suitable for the first and additional coatings of oiled wooden floors made of hard- and softwood, parquet, wooden paving and industrial parquet.  Benefits For oiled wooden floors, parquet, wooden paving and industrial parquetFor the first and additional coatingsExtremely durableStain-resistantEasy careShake well before use. Professional Care Oil is applied with a spatula and ensures an open-pore, water-repellent and dirt-resistant surface. If necessary, partial areas can also be reworked. The tools should be cleaned with SAICOS Brush Cleaner - benzene free.

Drainage grate to protect the seals in passagesAluminum profile with special geometryPerforation for quick water drainagegrooved surfacedeveloped for universal usedelivered in 1000 mm lengthIncluding BohrFix® FB 4.2 x 28BENEFITSprofessional executionaccording to standard B3691 and DIN 68800easy to work with conventional toolsProtection of hoists and sealsprevents the occurrence of splash watersuitable for your patio projectssimply put the required parts togetherfor mounting on wood or aluminum substructureeasy to attach to the substructure with BohrFix® FB 4.2 x 28

Twice as much coverage thanks to high oil content – this saves time and money! Transparent, satin, for the exteriorHighly recommended for exterior timber cladding, balcony elements, roof soffits, summer houses, screens, fences etc.Osmo One Coat Only HS Plus smoothens the wood surface and does not crack, flake, peel or blister. The finish is durable, weatherproof and UV-stable, regulates moisture and reduces swelling and shrinkage.Number of coats: 1 coat is sufficient!Can sizes: 0.75 L; 2.50 LNote: Light, transparent colour tones only offer minimal UV protection and are therefore not recommended for surfaces exposed to strong sunlight.Please note: the desired results of the colour tone may vary depending on the wood species.

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Stainless steel MOUNTS EXTERIOR WOOD PROFESSIONAL AND PERMANENTLY In mounting pack or object pack incl. assembly instructions, pencil S1 and SIHGAFIX stainless steel.The protected L-GoFix® MS multistage head combines high pullout force with a very small head diameter.The plane head conclusion gives the area a clean, elegant appearance, thereby increasing the constructive wood protection. For softer woods such as Larch, Douglas fir, pine, is the L-GoFix® MS to blow up without pre-drilling, with no pre-sinking and without the wood, simple and clean screwed from above! For harder woods such as Tropical woods or thermo-modified wood should be pre-drilled with the TerrassenFix® countersink TFB / ES II.The special SIHGA® tip guarantees very quickly attached. The integrated milling splines on the shaft and the sliding coating ensure easy screwing. Sharp thread flanks provide optimum seating in wood. These features enable universal use, even in OSB the L-GoFix® MS optimal screw to. SIHGA® Tip: For optimum constructive wood protection and to reduce the shear on screws (by the swelling / shrinking behavior of the timbers), we recommend the use of TerrassenFix® II TF or KompeFix® II KF.

For wood and metal!OSMO Paint Stripper dissolves and removes synthetic resin lacquers, 1-component lacquers, dispersion and latex paints, oil finishes and wood stains, dispersion glues, polymer plasters etc. on solvent-resistant substrates (wood, metal, mineral substrates, such as render, concrete or stone). It has a mild odour and therefore it can be used on large areas in both indoor and outdoor areas.ADVANTAGES > Powerful paint remover for the interior and exterior> Dissolves and removes synthetic resin varnishes and lacquers, oil coatings and dispersion paints> Can sizes: 1.0 L> 1 litre covers approx. 2-4 m² with one application.

SIHGA® TIPIn case of applications in the pool area with timbers and with a high tannin content, we recommend using L-BohrFix® MB A4. For surface-flush rotation, fast and secure, we recommend TerrassenFix® Depth Limiter TTB. fastens wood to wood without pre-drilling and without countersinkingreduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood also attaches coverings made out of hard and thermo-woodcreates a perfect look, with these woods additional pre-drilling is recommended multi-stage head with small head diameterhigh constructive wood protection and refined surface as a result of the plane head special thread angle with sharp thread edgeshigh pull-out value SIHGA® point with special shapeguarantees fast setting of screws without splitting SIHGA® ribs on shaft and slip coatinglight, fast rotation and optimum fit in the wood are guaranteed made from hardened stainless steelrust-free fastening, extremely break-proof also available with black (SC 9 coating) and antique look (SC 11 coating)optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai including SIHGAFIX® stainless steel, Systemstift® and installation instructionstime-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4).L-GoFix® MS A2 made from A2 stainless steelstands out thanks to its good corrosion resistance and is best used in moderate, corrosive environmentsBecause of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials

Stains are a thing of the past! The natural care for streak-free floors is here The SAICOS Ecoline Floor Care Set contains everything you need to clean and care for beautiful oiled floors. The gentle wash care and regenerating Ecoline Wax Care are the dream team for maintaining beautiful wooden surfaces. Benefits Regenerates and protects oiled wood and cork surfaces, PVC, linoleum, ceramics or tilesSAICOS Ecoline Wash Care Concentrate 1 litreSAICOS Ecoline Wax Care colour-free 1 litreApplication towelsInstructions for useFor oiled surfaces For easy cleaning and care of wooden floors and more The future is green! We becoming more and more conscious of our ecological footprint and it is increasingly influencing our actions. We have created the Ecoline product line to meet the demand for environmentally friendly products. Sustainable and durable products for finishing wood surfaces.  No more streaks thanks to SAICOS Ecoline Wash Care Concentrate. The solvent-free concentrate consists of vegetable soaps and natural care additives. It cleans gently and thoroughly and can be used for wood and cork floors as well as for PVC, linoleum, ceramics or tiles. SAICOS Ecoline Wax Care regenerates and protects heavily-used oiled wood and cork surfaces in indoor areas. It creates a water- and dirt-repellent surface that can be polished and easily cleaned as needed. Partial use, for example on walking paths in door areas, is also possible with this product. Simply spread approximately 1 cap per square meter thinly and evenly with a cloth, then polish with a clean cloth. There are no visible transition areas to the untreated surface.

SIHGA GleitFix is a further development of the SIHGA DielenFix.Now also for start and end boardsNew are special fasteners for the start and end of a terrace. With GleitFix AE, Sihga has also succeeded in screwing these boards invisibly from below. In this case, a metal spring, which is screwed onto the underside of the board, is threaded into a glass-fiber-reinforced plastic plate which is fastened to the substructure. A special balancing system takes into account the swelling and shrinkage behavior of the wood. Now the edgeboards have the same look and longevity as the rest of the terrace. The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix GF can be used for nearly all types of wood with a width between 90 and 150 mm.Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces. The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection at GleitFix® AE CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:Type GleitFix® AE incl. BohrFix® stainless steelType GleitFix® AE CS incl. BohrFix® stainless steel A4

especially for oak SAICOS Stain Remover is a highly effective special product. Benefits 0.5 litres = approx. 5m²especially for oakFor removing water and reaction stains SAICOS Stain Remover is a highly effective special product for removing water as well as reaction stains (e.g. oxidation) from oiled oak surfaces. The gel-like texture enables uncomplicated application and is particularly intensive.

Especially developed for windows and doors – extremely water-repellent, weatherproof and UV-stable!Opaque, satin, for the exterior.Highly recommended for windows and doors.Osmo Opaque Gloss Wood Stain is water-repellent, weatherproof and UV-stable. The finish is easy to apply and offers great coverage.Number of coats: Two coats on raw wood. For renovation generally one coat applied thinly to the clean and dry surface is sufficient - no sanding required!Can sizes: 0.75 L; 2.50 L1 litre covers approx. 20 m2, with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

SIHGA GoFix MS II is ideal for outdoor use, in the case of pergolas or carports, which are not exposed to direct weathering. The SC 7 coating has a 10 times higher corrosion protection than conventional zinc plating.Your benefit:     Fixed wood on wood up to 500 mm, even OSB boards     Without pre-drilling and without pre-drilling is screwed     A special multi-stage head reduces the gap effect in the wood     Saves 50% of storage, combined with countersunk head and disk head     Transmits high forces, is nevertheless retractable and allows close-fitting screwing     Attaches pressure-resistant insulation materials for ridge insulation     Significantly increased corrosion protection, can be painted over     For applications in the corrosivity category C4-lang or C5-mittel     Special milling ribs on the shaft and sliding coating     Pre-drilling effect, easy insertion, low-noise SIHGA® screw tip     Quick assembly, easy-to-use and time-saving     Including SIHGAFIX®, Systemstift® and assembly instructions     Time-saving, practical, precise, complete accessories are packed; SIHGAFIX® also screws in deep grooves     SIHGA® MSZ wheel for diameter 8 mm     This ornamental disc MSZ increases the pulling force of the head further to 9 kN; Visually very nice and high traction     Positive appraisal for processing with impact wrenches     Saves time and provides security, even when working overhead     ETA European technical approval with external monitoring     Reliable, externally monitored values ​​provide safety during processing and exclude quality fluctuations

Removes old Decking-Oils and wood stains uniformly and effectively PRODUCT DESCRIPTION
Ready-to-use, viscous paint remover especially developed for removing old existing oil surface finishes in outdoor areas. Afterwards the surface can be degreyed with Osmo Wood Reviver Power-Gel and then re-oiled.RECOMMENDED USE
Osmo Paint Remover Gel removes old Decking-Oils and wood stains on timber decking and garden furniture made of wood. Ideal for removing oil-based surface finishes on partially weathered timber decking so that an overall oil-free wood surface is achieved.INGREDIENTS
Osmo Paint Remover Gel contains Aqua, Xanthan Gum, Sodium Hydroxide, Potassium Hydroxide. Detailed declaration of ingredients available upon request. TECHNICAL DATA
Specific weight: (density): 1.05 g/cm3 +/- 0.05 g/cm3 pH value: 11.0-11.5STORAGE
Up to 2 years and longer if kept dry, closed tightly and stored in the original container. Do not expose to frost or temperatures over 30 °C!SURFACE PREPARATION
Before the application, remove any debris from the surface with a broom or hand broom.
Cover all areas that should not be treated.
Osmo Paint Remover Gel is ready to use. Do not thin. Stir well before and during use as some separation in product may occur after some time.
Before treatment with Osmo Paint Remover Gel, test the subsurface. A trial application is absolutely.APPLICATION necessary! Suitability, reaction time and required application amount can be determined on representative trial area. Caution should be taken when used on veneers! Veneers may loosen from substrate.METHODS OF APPLICATION
With a brush or Osmo Decking Cleaning Brush, apply product thick enough (approx. 200 ml/m2) on the dry surface to be cleaned, and allow to react for 60 minutes (but not longer than needed!).
Keep surface damp during reaction time (e.g. with a spray bottle). Afterwards scrub the surface with a lot of clear water along the wood grain. After drying, inspect the wood surface and repeat the process if necessary. Residues from Paint Remover Gel can have a negative influence on the drying and adhesive properties of subsequent coatings.
Therefore, it is absolutely essential to thoroughly rinse the surface after treatment. If the wood surface should be re-oiled, the surface must be neutralized and degreyed with Osmo Wood Reviver Power-Gel after drying.CLEANING OF TOOLS
Immediately after use, with soap and water.DRYING TIME
Allow to dry for at least 48 hours (normal climatic conditions, 23 °C/50 % rel. humidity) before applying a new surface finish. Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.COVERAGE
1 litre covers approx. 5 m2 with one application.NOTE
Cover all areas that should not be treated, such as sensitive plants, porous substrates (e.g. lightly coloured pebble dashed concrete, render etc.), aluminium, zinc or lacquered surfaces. Have mop water ready to rinse any surfaces (e.g. aluminium, zinc or lacquered areas) that have accidentally come into contact with the gel. Please wear safety gloves and goggles.

PROFILED SELF-TAPPING SCREW Designed to efficiently drill through metal. High breaking strength and the special geometry gives this screw the properties to achieve a perfect fit. Length: 35 - 70 mmDiameter: 5,5 mmHead: 3-Step-Head

For naturally greying wooden façades and garden woods Ageing with style and the effective Greying Wood Stain for outdoors. The SAICOS Greying Wood Stain evens out the transition from heavily greyed areas to natural, even and flowing wood greying. This special wood stain for outdoors protects in a natural way and is particularly hard-wearing: The natural oils penetrate deep into the wood, offer optimal wood protection from the inside and keep it elastic. The polymer dispersion protects the surface against weather and moisture.  Benefits Equalizes the transition to natural, even greyingJust 1 coat is enough for an appealing result on the woodFast drying wood stain for outdoorsWood protection for all weatherWater-based Visually, new woods can be easily adapted to older ones The Wood Stain for exterior with greying effect is weather-resistant, easy to care for, breathable, water- and dirt-repellent and is suitable for both smooth and rough sawn wood. One coat is enough, the rest of the greying is done by nature. With the Wood Stain for surfaces coated on the outside, washing or cleaning can be done easily with water. SAICOS Green-Ex Concentrate is very well-suited for particularly stubborn stains and can be used outdoors in combination with the Wood Stain. The item is available in two colours: Graphite grey and stone grey. Depending on the use, the coating result can be different - this again ensures a particularly authentic wood look. SAICOS Greying Wood Stain is a transparent wood stain for outdoors and is based on our proven oil-polymer dispersion. The oil-modified paint is open-pore, weather-resistant, easy to care for, water- and dirt-repellent. It is suitable for smooth and rough sawn wood and is quick drying. One coat is enough to create natural greying. The wood stain for outdoor areas bonds permanently with the wood surface. It is breathable, moisture regulating, does not tear and does not peel.

Hard-wearing surface protection for wooden flooring and furniture! Hartwachs-Öl Express is a professional, fast drying finish for wooden flooring, furniture and other high traffic surfaces. Its unique oil-wax combination provides optimal surface protection.ADVANTAGES FOR PROFESSIONALS>  Fast drying>  Suitable for commercial interiors>  No primer, no sanding between coats>  Recoatable after approx. 4-5 hours>  Can sizes: 0.75 L; 2.50 L>  1 litre covers approx. 24 m²ADVANTAGES FOR YOUR CUSTOMERS>  Based on natural, vegetable oils and waxes>  Chemical resistance to water, red wine, cola according to German DIN 68861-1A>  Safe for humans, animals and plants when dry>  Easy cleaning and maintenanceAPPLICATIONFinished surface in 1 day, 2 coatsFirst coat on the raw, sanded wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 4 - 5 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a scouring pad before applying the second coat.Second coat approx. 35 ml/m².Drying time approx. 4 - 5 hours