DECKING - FURNITURE

Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.

Base and top coat combined into one – the innovative, long-term, oil-based wood protection! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony, screens, fences etc.Natural Oil Woodstain is water-repellent, weatherproof and UV-stable. The microporous surface contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 lNatural Oil Woodstain 701 Clear matt can be used to reduce the gloss level of Osmo satin wood finishes used on vertically installed exterior wood. When used as a self-priming finish, it offers no UV protection.Please note: the desired results of the colour tone may vary depending on the wood species.

Oil-based, anti-slip finish – added safety for your family! Clear, satin finish for the exteriorHighly recommended for wooden deckingAnti-Slip Decking Oil reduces the risk of slipping and extends the life of the pigmented base coat by providing extra protection against weathering. The surface is water-repellent, weatherproof and UV-stable. The finish is protected against mould, algae and fungal attack.Number of coats: One top coat on decking that has already been coated with one of the pigmented Osmo Decking-Oils. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 L; 2.50 L 

Osmo-grain wax protects your decking from cracking and minimize the swelling and shrinkage behavior. Grain-growth effect from the inside and prevent the bleeding of ingredients. The water-free, silicone-free grain-growth is easy to handle and has a high resistance to weathering.Coverage:375 ml sufficient for about 250 decking with bilateral treatment

Ideal for protecting against dirt from open-pored stone and terracotta surfaces.Osmo stone and terracotta oil is suitable for the colorless impregnation of open-pore natural stone with a polished, polished to rough-rough surface and concrete stones in the outdoor area. Particularly suitable for sidewalk slabs and window sills made of granite, limestone and slate.BENEFITS> Unique oil-wax combination> Open-pore surface> Protection against dirt and abrasion> resistant to wine, cola, beer (according to DIN 68861-1A)> Strongly water-repellent> Container sizes: 0.75 l; 2.5 l;> 1 liter is sufficient for one coat for approx. 32 m2. The range of the product depends very much on the absorbency of the surface and it can lead to significant deviations in the range.

Ideal protection against dirt and stains!OSMO POLYMER COMPOSITE MAINTENANCE OIL 030 is a clear product suitable to maintain and restore weathered Wood Polymer Composites (WPC) and Bamboo Polymer Composites (BPC). Especially suited for decking, privacy screens and garden furniture made of WPC or BPC.ADVANTAGES>  Based on natural oils >  Microporous surface>  Stain protections and highly water repellent >  Safe for humans, animals and plants>  Can sizes: 0.75 l; 2.5 l>  1 litre covers approx. 40 m² with one coat.APPLICATIONBefore applying, clean the whole surface with water and Osmo WPC & BPC Reiniger and allow the surface to dry.Apply very thinly with Osmo Flat Brush or Osmo Decking Brush and spread well.Remove excess material with a clean and dry Decking Brush.Drying time approx. 8-10 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.

Osmo Graying Stain is an oil-based, matt glaze for exterior use that has been specially developed to give wood a natural, gray patina. It provides long-term protection while giving the wood an aesthetic, silver-grey hue typical of naturally aged wood.Intended use:- Ideal for all types of exterior wood such as doors, windows, shutters (dimensionally stable components), carports, wooden facades, balconies, wooden terraces, fences, pergolas and garden sheds. - The stain gives the wood a natural, silver-grey patina that mimics the typical appearance of weathered wood outdoors.Properties: - Oil-based formulation: the glaze is based on a high-quality oil technology that deeply protects the wood while emphasizing the natural structure and grain of the wood. - Matt surface: The matt appearance provides an authentic, weathered wood surface that exudes a natural charm. - Pre-graying: The glaze creates a premature graying effect that allows the wood to have an aged look right from the start - ideal if you want the weathered charm of wood immediately. - Long-term protection: It offers long-term protection against the weather and prevents the formation of algae, fungi and other types of mold. This means the wood remains protected in the long term and retains its beautiful appearance. - Water-repellent and breathable: The glaze protects the wood from moisture, but at the same time allows it to “breathe”, preventing moisture from accumulating in the wood. - Easy to apply: The glaze is easy to apply and absorbs quickly without obscuring the natural wood structure.Application: 1. preparation of the surface: the wood surface should be clean, dry and free of dust, dirt and old coats of paint. If necessary, the wood should be sanded to ensure better adhesion. 2. application: Osmo Graying Stain is applied evenly with a brush, roller brush or sprayer. It is recommended to treat the wood in the direction of the grain.3. allow to dry: The glaze dries relatively quickly, but approx. 4-6 hours drying time should be allowed between coats. For a more intensive result, a second or even third coat can be applied.4. maintenance: After application, the wood can be maintained regularly depending on the weather conditions in order to maintain the graying. Container sizes: 0.75 l, 2.50 lThe range of the product is 26 m²/1 l with 1 coat.Conclusion: Osmo Graying Stain is an excellent choice for anyone who wants to achieve the natural, silver-grey look of weathered wood for their exterior surfaces without sacrificing protection and durability. With its oily matt finish and long-lasting protective effect, the glaze is perfect for wooden facades, balconies, fences and many other outdoor wooden surfaces. It not only protects the wood from the elements, but also gives it an attractive, gray patina.