Works against the natural colour changes caused by UV rays Wood is exposed to the sun every day. If it is not coated with Ecoline UV Protection as a precaution, UV rays change its colour in the long run. Benefits Additive for the SAICOS Ecoline MultiTop paintFor improved UV protectionFor long-lasting, intense wood colour We recommend the addition of Ecoline UV Protection so that you can enjoy the original colour of your floor for longer. Because this reduces the natural colour change of the wood by exposure to light. The amount in the additional container is exactly matched to the SAICOS Ecoline MultiTop paint.

Extends the workability of the paint Paint dries at different speeds depending on the climatic conditions. An extended processing time can be an advantage. Benefits Additive for SAICOS Ecoline MultiTopTo delay drying Only in combination with SAICOS MultiTopPlus The Ecoline Delayer "Slow Down" extends the workability of the paint. Especially under critical site conditions with high temperatures and low humidity. The amount in the additional container is exactly matched to the SAICOS Ecoline MultiTop paint.

Anything but ordinary Black wood floors may be a little unusual, but they can be a real eye-catcher in the right environment. And black can be a unique look for furniture as well. Benefits Additive for SAICOS Ecoline MultiTopBlack surfaceShows the structure of the wood and the way it is laidOnly in combination with SAICOS MultiTopPlus  With Ecoline Pitch Black, you get an extraordinary effect that still shows the structure of the wood and the way it is laid. The amount in the additional container is exactly matched to the SAICOS Ecoline MultiTop paint.

Fastening system for handrail posts on flat roof waterproofing  > Ideally suited for railings and privacy screens > Infinitely variable and easily accessible inclination adjustment up to 4 ° in all directions > Reinforcement of the pressing surface using GoFix® S + > Valve for leak testing > Can be combined with various seals > Seals are jammed > including SIHGAFIX®, GoFix® S +, as well as all seals Your benefit > quick, easy and safe assembly > offers great stability and flexural strength > The straight and aligned appearance of the posts without time-consuming adjustment > Use on wooden beams and solid wood ceilings, as well as CLT systems > Security of connection and sealing, system can be serviced > attached to PVC, EPDM and even sheet metal > Retrofitting in existing seals is also possible > time-saving, practical, precise, all accessories included Tip: use leak spray and air pump to check for leaks

The PLATA C decking connector guarantees very easy and quick assembly for modified wood species and compound decking boards with lateral groove. Two elastically designed spring elements adapt to the groove engagement height and ensure a perfect clamping effect during assembly. The clamping effect is designed for a groove height of 4.0 to 7.0 mm. The solidly designed screw zone ensures optimum force transmission into the groove receptacle of the planks. An extra-long screw guide guarantees comfortable screwing into the substructure and gives a uniform joint spacing of 6.0 mm. The substructure can be made of wood, wood-like materials or aluminum. OverviewFastening: ConcealedType of fastening: Sliding point - sliding pointJoint spacing: 6.0 mmDecking board: For modified, dimensionally stable wood species and compound planks with lateral grooveDimensions: L 40 mm | W 18 mmSpring element: Clamping effect for groove heights of 4 - 7 mmPlank exchange: PossibleMaterial: PP Polypropylene RecycledDrilling capacity UNIA: Aluminum with approx. 3 mm thicknessSpecial feature: Compatible with spacer Each VPE contains the UNIA1 system screws 4.8 x 34 mm or 4.8 x 47 mm required for installation and installation instructions.

Even joints are to be made with the simplest TerrassenFix® II TF. Simultaneously, the 6 mm thick TerrassenFix® II TF ensures optimum constructive wood protection, that is, between decking and substructure is optimally ventilated and prevented waterlogging. Another important advantage is that the screws are not loaded for shearing but to bend through the use of TerrassenFix® II TF.The TerrassenFix® II pin TFS enables quick setup of the joint width during assembly and is then completely removed again - very important so that the decking will not be blocked in their natural swelling and shrinking operations!The TerrassenFix® II TF does not have to be laboriously screwed to the substructure, but is merely placed. The special material increases walking comfort on the terrace!Total offers TerrassenFix® II TF huge relief and reduction of working time and a significant extension of the life of terraces.

Brush with 80 grit for TERRASSEN-RANDY decking edge cleaning machine. With special wave cut for cleaning grooves, grooves and edges. Made of polyamide, easy to replace with centre screw.

Efficient and easy cleaning and renovating of wooden deckings and wirebrushed wood floorings with the SandBrushMethod of BLITZ - POWERBRUSHER Dirt and greyed layers are removed thoroughly yet gently. The ideal preparation for protection with decking oil. Powerful motor, robust construction, easy handling. The toxic and harmful tropical wood dust is extracted with the integrated hoover. Easy transport with trolley, even on stairs (see accessories).- Excellent, environmentally friendly function without chemicals and water- Powerful 2.2 kW motor for fast work progress- Also cleans grooves and grooves thanks to special sanding brush- Suitable for hard and soft woods (brush rollers P 60 and P 80 available, a brush of your choice is included in the scope of delivery)- Handy format, also allows work on smaller terraces- Easy to transport, even by one person - supplement with TERRASSEN - RANDY edge brushing device- Fast delivery of spare parts and service - Made in GermanyVoltage: 230 V 50- 60 HzPower: 2.2 kWMass: 61 kgSpeed: 2,400 / min.Brush: 200 x 185 mm

10-piece set with 3 metre hose, flat nozzle, round nozzle and round brush, suction attachment with suction pipe. Made of black plastic.

Underlines the natural beauty of wood Wood is a natural raw material and every piece is unique. Often there is no need for colour changes because of its natural beauty We have developed Ecoline Additive Pure to protect it regardless. Benefits Addive for SAICOS Ecoline MultiTopPerfectly protected surfaceFor a surface which looks nearly untreatedOnly in combination with SAICOS MultiTop Ecoline Pure creates a perfectly protected wood surface and underlines the untreated natural look of the wood. The amount in the additional container is exactly matched to the SAICOS Ecoline MultiTop paint.

The T-Stick is suitable for fastening side-grooved decking made of low-movement wood types or WPC to substructures made of wood or aluminium. The T-Stick is inserted between two wooden boards and fastened in the board groove with a stainless steel clamping plate. The clamping plate is screwed to the substructure with a stainless steel screw between the joints. The spacer domes ensure an even joint spacing of 5 mm between the boards. The distance of approx. 9 mm between the boards and the substructure allows good ventilation and can significantly increase the service life of the entire decking. Advantages Indirect/ invisible fastening solution Readjustment and replacement of individual boards is possible at any time. Compatible with classic timber substructures as well as our modern aluminium system profile and the HKP decking support system Uniform plank spacing Supports constructive wood protection Weather-resistant Instructions for use The T-Stick may only be used for low-movement decking. 
Low-movement decking includes the following types of wood, treatment methods and composite materials: Larch Douglas fir Wood-polymer composites (WPC) Thermowoods made from softwoods & hardwoods Acetylated wood The use of the T-Stick is not recommended for woods with high bulk density and/or high swelling and shrinkage and only moderate stability (dimensional stability). This applies in particular to the wood species cumarú, ipé, massaranduba and robinia (false acacia).When selecting wood, particular emphasis should also be placed on good cut sorting (e.g. sorting out boards with interlocking growth and so-called "flader boards") as well as good conditioning (setting the equalising moisture content) of the decking boards.The suitability of the type of wood must be determined by the manufacturer/wood supplier if necessary.The T-Stick is suitable for boards with the following groove geometry: → Groove depth: ≥9.0mm→ Groove width: ≥3.0mm→ Groove cheek thickness: for timber or WCP substructures: ≥6.0 mmfor aluminium system profile and HKP decking support system: ≥10.0 mm

The RELO system accessories enable a simple and quick system construction of terrace substructures.RELO E corner composite angles are used for composite connections of terrace substructure rails, support connections for the ventilation profile and connection points for facing.RELO L longitudinal connectors are used for an endless and offset-free extension of the substructure rails. The longitudinal joints should be carried out directly at the point of support.The corner brackets and longitudinal connectors made of solid aluminum enable precise fitting thanks to automatic centering on the lateral guide slots of the substructure rails.RELO A adapter is used for the screwless positioning of the substructure rail on the LIFTO terrace foot and at the same time enables guidance for the longitudinal joint.RELO R railing is used for the parallel alignment of the substructures and results in an automatic center distance of 450 mm.The hard galvanized metal bars can be shortened if necessary.RELO A and R can be quickly and easily combined using a simple plug connection.

The heavy duty pre-drill and countersink tool does it all in one motionenabling a fast, easy and clean screw hole for the perfect screwhead finish. The HELPO countersink drill bit allows for precise and uniform serial drilling and countersinking in a single operation for visible screw connections in deck building. The hardened chrome steel ensures an extremely long service life and is suitable for all decking boards made of wood and wood-like materials. The drill geometry with an integrated depth stop ensures a perfect flush finish for the 5.0 mm and 5.5 mm thick PROFILA, SOLIDA, and ELITA deck screws. Technical Specifications: Drill Diameter: 5.5 mmDrill Depth: 25 mmCountersink Diameter: 8.0 mm Key Features & Benefits: All-in-One Operation: Performs precise and uniform serial drilling and countersinking in one step.Perfect for Visible Screws: Ideal for creating clean, professional-looking visible screw fastenings in decking.Wide Compatibility: Suitable for decking boards made of wood and wood-composite materials.Integrated Depth Stop: The special drill geometry guarantees a perfect, flush screw head finishevery time.Screw Compatibility: Designed specifically for 5.0 mm and 5.5 mm PROFILA, SOLIDA, and ELITAdeck screws.Durable Construction: Made from hardened chrome steel for an extremely long tool life. In summary, this HELPO countersink drill bit is a specialized tool for professional deck building that saves time and ensures a perfect, clean screw installation result.

The simplest and fastest concealed fastening for laterally grooved decking boards.The PLATA decking connector guarantees easy and fast assembly for side grooved decking boards made of wood or wood-like materials.The two integrated spring elements in the groove engagement surface provide a perfect clamping effect during assembly and ensure a force-locked connection.Fixing: concealed system Fixing type: sliding point - sliding point Space distance: 6,0 mmDecking board: profiled with side groove Wood species: high dimensional stability boardsDimensions: L 65 mm | W 24 mmSpring element: with clamping effectBoard rep.: possible Material: stainless steel, black coatingSpecial feature: substructure is coveredIncluded in every package are the required UNIA1 system screws 4.8 x 34 mm or 4.8 x 47 mm and instructions

The LIGO C decking connector guarantees easy and quick installation for modified wood species and compound decking boards with lateral groove.The spacer ensures optimum ventilation and prevents the formation of waterlogging between the decking and the substructure.The spring elements integrated on the spacer contribute to a force-fit connection, prevent noise development and increase walking comfort. The solid screw zone ensures optimum force transmission into the groove receptacle of the planks. An extra-long screw guide ensures comfortable screwing into the substructure and gives a uniform joint spacing of 6.0 mm.The substructure for the LIGO C decking connector can be made of wood, wood-like materials or aluminum.  Fastening: ConcealedType of fastening: Sliding point - sliding pointJoint spacing: 6.0 mmDecking boards: For modified, dimensionally stable wood species and compound planks with lateral grooveDimensions groove plate: L 40 mm | W 18 mmMaterial groove plate: PP Polypropylene RecycledMaterial spacer: ABS plastic blackPlank exchange: PossibleDrilling capacity UNIA: Aluminum with approx. 3 mm thicknessSpecial feature: Modification to start, end connector In each VPE are the UNIA1 system screws 4.8 x 34 mm or 4.8 x 47 mm required for assembly and assembly instructions

RELO N is a system substructure joist for LIGO and PLATA. The integrated screw channel facilitates easy screw fastening in aluminum. In addition, the 9mm recessed screw channel significantly reduces shear forces acting on the fastenings. Two lateral guides automatically align and center the decking clips on the substructure joist, which is completely concealed by the clips.

RELO T is a system substructure joist for the TENI clips. The integrated screw channel enables angled screw installation into aluminium. Two lateral guides auto- matically align and centres the clip on the substructure joist.

RELO C is a compact design suitable for low construction heights. Despite its low construction height, the overall design provides the decking with high structural stability.

1 set is for one fence panel H 1,800 x W 1,800 mm = 3.24 m22 pcs TERA post connection profile PA2 pcs TERA stabilisation profile SP4 units TERA cover profile AP1 pc TERA end profile ASP10 UNIA1 screws, 4.2 x 28 mm hardened stainless steel, TX20200 UNIA1 screw, 4.2 x 17 mm hardened stainless steel, TX20Introducing the TERA fencing and privacy screen kit, designed for effortless customization of fences, wind or privacy screen elements. With the TERA PA Post Connection Profile, achieve a seamless transition from fence infill to post, enhancing the overall aesthetic appeal. Simply insert fence infills (e.g. rhombus mouldings or smooth-edged boards,) into the post connection profile and secure them in place. The generously sized mounting covers effectively mask any cut edges or length differences. Ensure stability with the slimline TERA SP Stability Profile, fitted between posts to prevent twisting of fence panels. Hide screw connections elegantly with the TERA AP Finishing Trim, adding to the system‘s visual appeal. Complete the look with the TERA ASP Top Cap Profile, providing a flawless finish and additional structural protection for the top fence infill board. Extend the end profile effortlessly with the optional extension set as needed. Overview Dimensions:TERA PA - Post Connection ProfileLength 1,800 mmPA 19 – 23 for fence infills from 19 – 23 mm  ǀ  PA 24 – 27 for fence infills from 24 – 27 mmTERA SP - Stability ProfileLength 1,800 mm  ǀ  Width 18 mm  ǀ  Height 8 mmTERA AP - Finishing TrimLength 1,800 mm  ǀ  Width 15 mm  ǀ  Height 4.5 mmTERA ASP - Top Cap ProfileLength 1,800 mmfor PA 19 – 23  ǀ  for PA 24 – 27 Material:Aluminium EN AW 6060 Surface:Silver anodised E6/EV1 or powder-coated RAL 7016 Accessories:FUGO Joint spacer 5 ǀ 8 ǀ 12 mm for rhombus mouldingsTERA ASP: Extension-set for fence widths over 1,800 mm

The RELO VU Height Adjustment Set is designed to compensate for height differences of up to 18 mm between the RELO V-profile (20 mm high) and your decking boards. Installation is quick and easy thanks to the click system and stacking guide.Set contents:1x click adapter: base height 6 mm3x additional shims: in thicknesses of 2 mm, 4 mm, and 6 mmFastening screws for installation on the substructure are included in the scope of delivery.Possible total heights:By combining the individual parts, you can achieve different heights:Click adapter only: 6 mmClick adapter + 2 mm: 8 mmClick adapter + 4 mm: 10 mmClick adapter + 6 mm: 12 mmClick adapter + 2 mm + 4 mm: 12 mm... and other combinations up to a maximum of 18 mm Product features:Material: UV- and weather-resistant polypropylene (PP), recycled, blackDimensions: 15 x 150 mm (for all underlays)Fastening: Click and screw connectionCompatibility: Fits all common substructures. Installation advantages:Stack guidance: Easy and stable stacking of the underlayers.Automatic guidance: The RELO V-profile snaps securely into the click adapter. Quantity per profile:You need 2 to 3 underlayer sets per RELO V-profile, depending on the center distance of your substructure.

The HELPO decking clamp is a practical tool for the simple and precise installation of terrace decking. Its main advantages at a glance: Prevents Lifting: The flat design ensures that the decking boards do not lift up when screwing them down.Strong Clamping Force: Easily generates a clamping force of approx. 150 kg for a secure hold.For a Perfect Look: In combination with the HELPO mounting aid, it guarantees uniform gaps and straight rows of decking.Flexible Use: The flush clamping jaw is also ideal for the first and last board. Technical Details & Recommendation: Clamping Range: Up to 970 mmGap Engagement: Can be used with gaps as small as 3 mmQuantity per Meter: For an optimal result, one clamp per linear meter of decking is recommended. In summary:The HELPO Terrassenzwinge is the ideal solution for a professional and clean installation of your terrace decking, ensuring a flawless final result for DIY enthusiasts as well.

The KONEKTO N is a sophisticated, hidden fastening system designed for a quick, simple, and secure installation of side grooved types of decking boards. 1. Key Features & Benefits Easy & Secure Installation: Designed for a very simple, fast, and safe mounting process.Automatic Compensation: The four flexible and durable-elastic claw inserts automatically compensate for production-related irregularities in the decking board or its groove position.Independent Board Movement: Each board is fixed individually. Swelling and shrinking processes (up to 4 mm per board) are not transferred to neighboring boards, preventing a "chain reaction" across the entire deck surface.Non-Blocking Swelling: The screw is fixed into the substructure through the base plate, allowing for free movement in the gaps between boards without being blocked.Consistent Gap: Two integrated gap spacers ensure a uniform gap of 6.3 mm between boards. 2. Technical Specifications Dimensions (with UNIA1 screw): 74 mm (L) x 66 mm (W) x 10 mm (H)Gap Width: 6.3 mmMaterial: POM (Polyoxymethylen), black. UV and weather-resistant.Fastening Type: Hidden, single-point sliding fixation.Compatible Decking:Modified, dimensionally stable wood species.Composite decking boards.Requirement: Must have a side groove for the claw inserts. 3. Compatible Substructure The system can be used with a variety of substructures: WoodWood-based materials (e.g., plywood)Aluminum 4. System Screw (UNIA) Two screw variants are available, both included in the packaging (VPE): UNIA1: Hardened Stainless SteelUNIA4: Stainless Steel A4 - Recommended for decks in coastal areas and around swimming pools due to higher corrosion resistance. 5. Packaging & Ordering Information The product is sold as a complete set including the required screws and mounting instructions. Product DescriptionContentsArticle Number (80 pcs)Article Number (240 pcs)KONEKTO N with UNIA180 Clips + UNIA1 Screws034511000034513000KONEKTO N with UNIA480 Clips + UNIA4 Screws034511001034513001 Summary of the Working Principle The base plate is screwed onto the substructure.The decking board, which has a side groove, is placed over the clip.The four flexible claw inserts grip into the side groove of the board, clamping it securely onto the base plate.This creates a firm, hidden connection that allows the board to expand and contract independently.

The KONEKTO T is a concealed, side-fixing clip system designed for a simple, fast, and secure installation of concave side grooved types of decking boards. Key Features & Benefits Simple & Secure Installation: The decking board is simply pressed onto the base plate, where it is clamped into place via four flexible grips that engage with the board's side groove.Independent Floating Points: The system features four independent gliding points that work separately, allowing for individual movement of each board.Accommodates Wood Movement:The clip is screwed directly into the substructure through the base plate, preventing the fastener from blocking the natural expansion and contraction of the wood in the gaps between boards.Two integrated gap spacers ensure a consistent gap width (6.3 mm).The system can compensate for expansion of up to 3.0 mm per board.Prevents "Chain Reaction": Each board moves independently, so expansion or contraction is not transferred to neighboring boards, preventing issues across the entire deck surface.Versatile Substructure: Can be installed on wooden, wood-based, or aluminium substructures.Durable Materials: Made from UV and weather-resistant black POM (Polyoxymethylene). Technical Specifications Product Name: KONEKTO T (with UNIA2 or UNIA4 screws included)Dimensions (with UNIA2 screw): 74 mm (L) x 66 mm (W) x 10 mm (H)Gap Width: 6.3 mmClip Material: POM (Polyoxymethylene), black, UV and weather-resistant.Screw Type: UNIA System Screw (4.8 x 34 mm)UNIA2: Stainless Steel A2UNIA4: Stainless Steel A4 (for coastal areas and pool surrounds)Compatible Decking: Modified, dimensionally stable wood species and composite decking boards with a side groove (seitliche Hohlkehle).Fastening Type: Concealed, gliding-point fixation. Packaging & Ordering Information Each package contains the KONEKTO T clips, the required UNIA system screws, HELPO installation aids, and an instruction manual. Product DescriptionPack Quantity (STK)Article NumberKONEKTO T with UNIA2 (A2 Screws)80046211000240046213000KONEKTO T with UNIA4 (A4 Screws)80046211001240046213001HELPO Decking Clamp (Sold separately)1033900001