OSMO Oil Finish Application Fleece
For the simple and optimal application of all oil finishes on smooth subsurfaces.
From €7.98*
BRUSH CLEANER AND THINNER CLEAR
Cleans brushes, quickly and easily.For cleaning of painting utensils after applying Osmo Wood Finishes or other solvent-based oil or acrylic paints.Can also be used as thinner for solvent based paints.
€14.40*
OSMO Superpad
The OSMO Superpad is perfect for applying coloured primers or for intensive cleaning of your wooden floor. With the OSMO Superpad, you can also reach hard-to-reach corners and edges that you would not be able to reach with a machine. With the matching pad holder and telescopic handle, you can tackle your renovation with ease.Which pad is suitable for which work step?The white pad is ideal for colouring, polishing or light cleaning of furniture, wall panelling or wooden floors. As the pad is very fine, it is often used for final cleaning or for colouring furniture.The green pad is the centre pad. You can use it to remove somewhat coarser dirt and achieve a slight sanding effect. This pad is particularly suitable for light scratches. This pad can also be used for final cleaning (only for unfinished floor coverings or floor coverings that are to be re-oiled).The red pad is similar to sandpaper, which you can use to sand and renovate a floor. You can therefore use this pad for your renovation. With this pad, you can actually sand down the top layer of wood and then apply a new oil without any worries.Summary:The red pad is used to remove coarse dirt, sand the surface and shorten fibre heads.The green pad is used for fine sanding and cleaning the wood.The white pad is used to apply the new oil or colour and polish the wood.You can use the pad with the hand pad holder for furniture. For renovating floors, we recommend the pad holder with joint and the telescopic handle. These can be found in the accessories.
From €3.24*
Tip
OSMO LIQUID WAX CLEANER
COLOUR:: 3029 clear | can sizes: 1 Liter
Liquid Wax CleanerCleaning and refreshing in one - the specially made maintenance product for oiled and waxed floors!Clear or white transparent, for floorsEspecially recommended for the cleaning and maintenance of oiled and waxed floors, furniture and other wooden surfacesBoth cleans and regenerates the wood, as well as providing necessary waxes without building a film layerUse: Apply the Liquid Wax Cleaner to the floor (approx. 1 cap full per m²), spread and polish using the Osmo active fibre cloth (see Opti-Set)1 litre covers approx. 80 -100 m²
€34.98*
Tip
OSMO Hardwax-Oil Original
Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.
Content: 0.375 liter (€79.84* / 1 liter)
From €29.94*
OSMO Natural Bristle Brush
The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.
From €5.94*
Tip
OSMO Wisch-Fix WASH AND CARE
Natural cleaning and maintenance concentrate for floors – for regular cleaning and careEspecially recommended for Osmo finished floors, can also be used on laquered floors, laminate floors, tiles and PVCRefreshes without leaching the surfaceUse: Simply mix with water and damp mop the floorAvailable in 1.0, 5.0 and 25 litre drumsEspecially effective in the removal of fruit juices, milk, cola, beer, wine, coffee and other day to day marks and stains!
From €21.96*
2 microfibre roller for ROLLER & BRUSH SET
2 rollers 100 mm
Content: 2 unit (€3.96* / 1 unit)
€7.92*
Tip
OSMO Decking Oil
Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.
Content: 0.75 liter (€39.92* / 1 liter)
From €29.94*
OSMO WR BASE COAT 4001 Clear
The special protective wood impregnation against insect and fungal attack!Clear, for the exterior.Highly recommended for wood without structural loads or contact to the ground, e.g. windows, shutters, doors, pergolas, cladding and garden furniture.Osmo WR Base Coat is extremely water-repellent, reduces swelling and shrinkage, protects against wood pests, such as blue stain, rot and insect attack. Ideal is as a primer for all Osmo exterior oil-based finishes, all Osmo finishes are suitable as the required top coat!Number of coats: 1 coat is sufficient, a top coat is absolutely required.Can sizes: 0.75 l; 2.50 lApplication quantity: 160-200 ml/m2
Content: 0.75 liter (€38.40* / 1 liter)
From €28.80*
OSMO Concrete Oil 610 Clear
Makes concrete surfaces and unglazed tiles more satin-resistantOsmo Concrete oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.ADVANTAGES> Unique oil-wax combination> Microporous surface> Protection against dirt and wear> Highly water repellent> Resistant to wine, cola, beer (acc. DIN 68861-1A)> Sizes: 0.75 l; 2.5 l> 1 litre covers approx. 50 m2 with one coat. Product coverage varies greatly depending on the absorption rates of the substrate and this can lead to discrepancies in coverage. PROCESSINGFinished surface in 2 days, 2 coatsWith Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well.Remove excess with a pad or lint-free clothDrying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)Drying time approx. 8-10 hours
Content: 0.75 liter (€43.92* / 1 liter)
From €32.94*
OSMO UV-PROTECTION-OIL
Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.
Content: 0.75 liter (€46.40* / 1 liter)
From €34.80*
OSMO TELESCOPIC HANDLE
Ideally suited for working comfortably standing or on higher placesTelescopic handleHigh-quality aluminium telescoptic handleWith SoftTouch handle for work safetyAdjustable from 120-200 cm Shipping: Bulky goods surcharge € 10.00
€33.96*
Tip
OSMO Hardwax-Oil Effekt Natural 3041
Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.
Content: 0.75 liter (€55.92* / 1 liter)
From €39.96*
Tip
OSMO Decking Brush Set
Perfect application the easy way! Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods.
€45.60*
OSMO HAND PAD HOLDER 85x135 mm
Ideal for a precise application in smaller areas!Hand Pad Holder 85 x 135 mm, for Superpads 95 x 155 mm • Suitable for the application of base coats on wooden flooring and the intensive cleaning of wooden flooring and timber decking. • With Osmo Oil Finish Applicator Fleece, ideal for the application of Osmo Polyx®-Oils and Osmo TopOil. • Superpads in white, red and green and Osmo Oil Finish Applicator Fleece are available as accessories
€9.96*
Tip
ROLLER & BRUSH SET
Optimally equipped for any painting projectFor the optimal application of all oil based wood finishes • Ideal for treating larger areas made of rough sawn, untreated or planed wood. • Ergonomically shaped for fatigue-free work • Optimal product absorption and and even distribution provide very good finishing results. • Contents: roller tray with ridged area, disposable tray inserts (3 pieces), Microfibre Roller (100 mm wide) and roller frame and Flat Brush (60 mm) • Suitable for Osmo System Telescopic Handle
€32.94*
Tip
OSMO NATURAL OIL WOODSTAIN
Base and top coat combined into one – the innovative, long-term, oil-based wood protection! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony, screens, fences etc.Natural Oil Woodstain is water-repellent, weatherproof and UV-stable. The microporous surface contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding necessary!Can sizes: 0.75 l; 2.50 lNatural Oil Woodstain 701 Clear matt can be used to reduce the gloss level of Osmo satin wood finishes used on vertically installed exterior wood. When used as a self-priming finish, it offers no UV protection.Please note: the desired results of the colour tone may vary depending on the wood species.
Content: 0.75 liter (€49.28* / 1 liter)
From €36.96*
OSMO Spray Cleaner 8026 0.5 l
Ready-to-use spray solution for daily cleaning and maintenance – especially developed for surfaces oiled and waxed wood surfaces, e.g. Osmo TopOil. It contains soaps based on natural oils. Cleans the surface without removing oils and waxes. Spray Cleaner does not dry wood out. Especially mild on skin, free of dyes and fragrances, biodegradable, free of solvents and emissions.RECOMMENDED USE
Osmo Spray Cleaner is especially suitable for cleaning and maintaining oiled and waxed interior wood surfaces. It is particularly recommended for surfaces treated with Osmo TopOil.INGREDIENTS
<5% vegetable soaps (anionic surfactants), nonionic surfactants; in-can preservation: active ingredients: METHYLCHLOROISOTHIAZOLINONE, METHYLISOTHIAZOLINONE (C(M)IT/MIT (3:1))
TECHNICAL DATA
Specific gravity: 1.01-1.03 g/cm3 Odour: faint/mild, after drying odourless pH value at 20°C: 10.9STORAGE
Up to 2 years and longer if container is kept dry, closed tightly and stored at temperatures between 5 and 35°C. Do not expose to frost during transport!SURFACE PREPARATION Remove loose dirt. Osmo Spray Cleaner is ready to use. Please do not thin.METHODS OF APPLICATION
Turn the spray nozzle to open and spray Osmo Spray Cleaner directly onto the surface. Afterwards rub with lint-free cotton cloth.COVERAGE
Product coverage depends heavily on the amount of dirt and stains.NOTE
Only apply damply in order to avoid damages.
Content: 0.5 liter (€33.60* / 1 liter)
€16.80*
Tip
TOPOIL SURFACE KIT
One set for all eventualities – fully equipped for the treatment of worktops and furniture made of wood.Initial care, maintenance and refreshing in one set: TopOil clear matt 500 ml Spray Cleaner 500 ml Hand Pad Holder Oil Finish Applicator Fleece Buffing fleece Care instructions
€54.96*
OSMO Easy Pads 325x340mm (10 cloths)
Special cloths for cleaning and care of oiled-waxed surfaces and varnished wood surfaces • Easy and comfortable application • High cleaning power • Ideal for caring and polishingContent: 10 cloths 325 x 3040 mm
Content: 10 unit (€1.34* / 1 unit)
€13.44*
Tip
OSMO COUNTRY COLOUR
Multitude of colours and unrivalled durability – for all weather conditions! Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and summer houses, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces. ADVANTAGES> The wood structure remains visible> All colours can be mixed with each other> Country Colour is weather-resistant and robust against small damages> Resistant to saliva and perspiration, suitable for children's toys> Can sizes: 0.75 L; 2.50 L> 1 litre covers approx. 26 m2 with one coat. APPLICATIONFinished surface in 2 days, 2 coatsFirst coat on raw wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 10 - 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 35 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.
Content: 0.75 liter (€52.80* / 1 liter)
From €39.60*
Tip
OSMO TopOil 0.5l
Oil-wax coating – created specifically for use on wooden furniture and (kitchen) work surfaces! Clear or transparent, satin or matt, for the interiorHighly recommend for furniture and (kitchen) work surfaces made of woodTopOil makes the wooden surface resistant to common household chemicals and stains and abrasion and repels water. It is saliva-resistant and sweatproof, food-safe as well as suitable for children's toys.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no need for sanding!Can sizes: 0.5 lPlease note: the desired results of the colour tone may vary depending on the wood species.
Content: 0.5 liter (€59.88* / 1 liter)
From €29.94*
OSMO Intensive Cleaner 8019
Highly effective special concentrate, ideal for intensive cleaningOsmo Intensive Cleaner is ideal as an alternative to sanding on all wood surfaces treated with oils and waxes, e.g. B. floors, furniture and plastics, stainless steel and other waterproof surfaces.BENEFITS> no grinding, no dust> renovation of structured floors possible> existing patina is retained> easy to use> ideal for contract use> renovation without grinding> applicable inside and outside> container sizes: 1.0 l; 5.0 l> 1 liter is enough for one coat for approx. 30-100 m2 PROCESSINGDilute concentrate 1:10 to 1:20 with water.Apply to contaminated surfaces, loosen dirt and then absorb with clear water. For machine processing on floors, we recommend using a single-disc machine (e.g. Osmo FloorXcenter) with brush trimmings, red or green pad.Dirt pick-up with Osmo damp mop or lint-free cotton cloth.After drying, treat the cleaned surface with maintenance oil or a hard wax oil.Never use undiluted. Always check the substrate for compatibility. The after-treatment with maintenance oil or hard wax oil depends on the condition of the surface after cleaning.
From €27.60*