For the visible fastening of terrace boardsThe wooden terrace substructure is individually suitable for visible and invisible fastening of the terrace boards. The Dista strip 2.0 can be used for the visible fastening of terraces. It acts as a spacer and provides 7 mm of movement between the panel and the substructure.At the same time, the air circulation under the terrace is promoted by the spacer bar to prevent rotting. For the assembly normal wood screws, such as. B. Terrassotec screws are used.Shear of the screws is prevented by the Dista-strip 2.0 made of hard plastic. The shearing is caused by the swelling and shrinking of the wood. Working of the wood is particularly pronounced in the transverse direction. For this reason, the screw can break off under load. The Dista bar 2.0 should prevent this.Material: Hard plasticAdvantages Reduces the shearing off of fastening screws Supports constructive wood protection Weatherproof Instructions for useThe Dista bar 2.0 is fixed and fixed with Terrassotec screws Ø 4 mm in the holes provided. 5 Terrassotec screws are required for a spacer bar.Important: For hardwoods / tropical woods you should always pre-drill!* Screws are not included in the scope of delivery. Fastening with Terrassotec Ø 4 mm.

For the simple and optimal application of all oil finishes on smooth subsurfaces.

Cleans brushes, quickly and easily.For cleaning of painting utensils after applying Osmo Wood Finishes or other solvent-based oil or acrylic paints.Can also be used as thinner for solvent based paints.

The OSMO Superpad is perfect for applying coloured primers or for intensive cleaning of your wooden floor. With the OSMO Superpad, you can also reach hard-to-reach corners and edges that you would not be able to reach with a machine. With the matching pad holder and telescopic handle, you can tackle your renovation with ease.Which pad is suitable for which work step?The white pad is ideal for colouring, polishing or light cleaning of furniture, wall panelling or wooden floors. As the pad is very fine, it is often used for final cleaning or for colouring furniture.The green pad is the centre pad. You can use it to remove somewhat coarser dirt and achieve a slight sanding effect. This pad is particularly suitable for light scratches. This pad can also be used for final cleaning (only for unfinished floor coverings or floor coverings that are to be re-oiled).The red pad is similar to sandpaper, which you can use to sand and renovate a floor. You can therefore use this pad for your renovation. With this pad, you can actually sand down the top layer of wood and then apply a new oil without any worries.Summary:The red pad is used to remove coarse dirt, sand the surface and shorten fibre heads.The green pad is used for fine sanding and cleaning the wood.The white pad is used to apply the new oil or colour and polish the wood.You can use the pad with the hand pad holder for furniture. For renovating floors, we recommend the pad holder with joint and the telescopic handle. These can be found in the accessories.

Liquid Wax CleanerCleaning and refreshing in one - the specially made maintenance product for oiled and waxed floors!Clear or white transparent, for floorsEspecially recommended for the cleaning and maintenance of oiled and waxed floors, furniture and other wooden surfacesBoth cleans and regenerates the wood, as well as providing necessary waxes without building a film layerUse: Apply the Liquid Wax Cleaner to the floor (approx. 1 cap full per m²), spread and polish using the Osmo active fibre cloth (see Opti-Set)1 litre covers approx. 80 -100 m²

for invisible fastening of decking boardsThe decking glider allows decking boards to be fastened indirectly / invisibly. This means that no screw heads are visible on the decking surface. This fastener is suitable for decking boards with side grooves as well as those without side grooves.The decking glider can be used either in combination with classic wooden substructures or with our modern aluminium system profile and HKP aluminium decking support system.AdvantagesIndirect/ invisible fastening solution
Supports constructive wood protection 
Weather-resistant
Application notes 
We recommend using the decking glide only with low-movement decking.
Low-movement decking includes the following types of wood, treatment methods and composite materials: 
Larch
Douglas fir
Wood-polymer composites (WPC)
Thermowoods made from softwoods & hardwoodsAcetylated woodThe use of decking gliders is not recommended for woods with high bulk density and/or high swelling and shrinkage and only moderate stability (dimensional stability). This applies in particular to the wood species cumarú, ipé, massaranduba and robinia (false acacia).When selecting wood, particular emphasis should also be placed on good cut sorting (including sorting out boards with interlocking growth and so-called "fladder boards") as well as good conditioning (setting the equalisation moisture content) of the decking boards.Furthermore, a joint dimension between the boards that is matched to the type of wood, wood moisture and board width is essential for a durable construction. Information on this can be obtained from your timber dealer.The decking glide is available in two versions:Decking glideBoard width: 80 - 160 mmBoard thickness: 20 - 30 mmDecking glide MiniPlank width: 90 - 100 mmPlank thickness: ≥20 mmProcessing:To fasten the boards, the glides are first screwed to the underside of the boards and then to the substructure from above. This type of fastening avoids a direct connection between the decking boards and the substructure. The decking boards therefore have greater freedom of movement (via the decking glide).We recommend using two screws per decking glide for fastening the decking glide to the board and two screws for fastening the decking glide to the substructure.For the Mini decking glider, you should use two screws for fastening the Mini decking glider to the board and one screw for fastening it to the substructure.

Natural cleaning and maintenance concentrate for floors – for regular cleaning and careEspecially recommended for Osmo finished floors, can also be used on laquered floors, laminate floors, tiles and PVCRefreshes without leaching the surfaceUse: Simply mix with water and damp mop the floorAvailable in 1.0, 5.0 and 25 litre drumsEspecially effective in the removal of fruit juices, milk, cola, beer, wine, coffee and other day to day marks and stains!

Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.

2 rollers 100 mm

Especially developed for the individual needs of numerous fine and coniferous wood species! Clear or transparent, satin, for the exteriorHighly recommended for garden furniture and wooden deckingSmoothens wooden surfaces and makes them water and dirt-repellent.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lNote: Osmo Teak-Oil is clear and offers no UV protection (greying).Please note: the desired results of the colour tone may vary depending on the wood species.

A simple spacing profile with a lot of know-how permits a ventilation gap eliminating the risk of waterlogging. Quickly mounted and fixable in order to achieve a long lasting and problem free result. Constructive wood protection was never so easy. Overview Fixing:spacer for visible screw connectionsLength:10 m RollWidth:10 mmHeight:7 mmMaterial:extruded plasticSpecial feature:sound dampening effect

The UNIA system screw is used to fasten metal or plastic parts to wood, wood-like materials and aluminum profiles up to a wall thickness of 3 mm.The tip, which is designed as a drilling unit, ensures a reduced splitting effect and less surface tension. Length: 17 - 47 mmDiameter: 4.2 mm and 4.8 mm Head: cylinder head Ø 5.8 mm Drill point: suitable for wood and aluminiumDrilling capacity: Aluminium with approx. 3 mm wall thickness Drive: TX 20Material: hardened stainless steel / stainless steel A4 1.4401with black surface coating DESCRIPTIONUNIA is a stainless steel self-drilling screw with a cylindrical head shape for fastening metal or plastic parts to wood, wood-like materials and aluminum profiles up to a wall thickness of 3.0 mm.The drill tip, which is designed as a drilling unit, ensures a reduced splitting effect and reduces surface tensions e.g. with screw connections on the back in element construction.APPLICATIONFor fastening concealed fastening systems such as TIGA, DILA, SUPRO, PLATA, LIGO and ZONA.The suitability and compatibility of the UNIA system screws with the component to be connected and their substructure may have to be determined by the plank or facade strip manufacturer / supplier.MATERIAL1.4006 / X12Cr13 / AISI 410 hardened stainless steelOptionally with black surface coating [black zinc plated]

The special protective wood impregnation against insect and fungal attack!Clear, for the exterior.Highly recommended for wood without structural loads or contact to the ground, e.g. windows, shutters, doors, pergolas, cladding and garden furniture.Osmo WR Base Coat is extremely water-repellent, reduces swelling and shrinkage, protects against wood pests, such as blue stain, rot and insect attack. Ideal is as a primer for all Osmo exterior oil-based finishes, all Osmo finishes are suitable as the required top coat!Number of coats: 1 coat is sufficient, a top coat is absolutely required.Can sizes: 0.75 l; 2.50 lApplication quantity: 160-200 ml/m2

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Replacing individual boards and open certain areas of the terrace within the IGEL® fastening system.For inspection openings or a subsequent installation of individual decking boards (repair kit).The switch is supplied with stainless steel screw 4.5 x 29 mm TX20.

Makes concrete surfaces and unglazed tiles more satin-resistantOsmo Concrete oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.ADVANTAGES> Unique oil-wax combination> Microporous surface> Protection against dirt and wear> Highly water repellent> Resistant to wine, cola, beer (acc. DIN 68861-1A)> Sizes: 0.75 l; 2.5 l> 1 litre covers approx. 50 m2 with one coat. Product coverage varies greatly depending on the absorption rates of the substrate and this can lead to discrepancies in coverage. PROCESSINGFinished surface in 2 days, 2 coatsWith Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well.Remove excess with a pad or lint-free clothDrying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)Drying time approx. 8-10 hours

For the visible fastening of terrace boardsThe wooden terrace substructure is individually suitable for visible and invisible fastening of the terrace boards. The Dista strip 2.0 can be used for the visible fastening of terraces. It acts as a spacer and provides 7 mm of movement between the panel and the substructure.At the same time, the air circulation under the terrace is promoted by the spacer bar to prevent rotting. For the assembly normal wood screws, such as. B. Terrassotec screws are used.Shear of the screws is prevented by the Dista-strip 2.0 made of hard plastic. The shearing is caused by the swelling and shrinking of the wood. Working of the wood is particularly pronounced in the transverse direction. For this reason, the screw can break off under load. The Dista bar 2.0 should prevent this.Material: Hard plasticAdvantages Reduces the shearing off of fastening screws Supports constructive wood protection Weatherproof Instructions for useThe Dista bar 2.0 is fixed and fixed with Terrassotec screws Ø 4 mm in the holes provided. 5 Terrassotec screws are required for a spacer bar.Important: For hardwoods / tropical woods you should always pre-drill!* Screws are not included in the scope of delivery. Fastening with Terrassotec Ø 4 mm.

Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Ideal for a precise application in smaller areas!Hand Pad Holder 85 x 135 mm, for Superpads 95 x 155 mm    •    Suitable for the application of base coats on wooden flooring and the intensive cleaning of wooden flooring and timber decking.    •    With Osmo Oil Finish Applicator Fleece, ideal for the application of Osmo Polyx®-Oils and Osmo TopOil.    •    Superpads in white, red and green and Osmo Oil Finish Applicator Fleece are available as accessories

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

For faster drying and higher resilience At construction sites, work is often done under time pressure and special climatic conditions. To finish a coat in just one day, we therefore recommend Premium Additive Hardener 2K. It enables faster drying and greater final hardness. Benefits Additive for SAICOS Premium Hardwax-Oil, SAICOS Ecoline Hardwax-Oil and SAICOS Ecoline Oil Ground CoatSurface can be used earlierGreater final hardness and increased abrasion resistanceSuitable for Ultra-matt Plus, Matt, Semi-Matt and Glossy Also for use in private households  With Premium Additive Hardener 2K in SAICOS Premium Hardwax-Oil, the oil dries faster, especially under difficult conditions such ashigh humidity. In general, the treated surfaces are more resilient and abrasion-resistant earlier.Premium Additive Hardener 2K is also suitable for SAICOS Ecoline Oil Ground Coat and SAICOS Ecoline Hardwax-Oil.The quantities in the additive containers are precisely matched to the respective can contents of SAICOS Premium Hardwax-Oil.

Ideally suited for working comfortably standing or on higher placesTelescopic handleHigh-quality aluminium telescoptic handleWith SoftTouch handle for work safetyAdjustable from 120-200 cm Shipping: Bulky goods surcharge € 10.00

Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.