SIHGA® L-GoFix® MS

Stainless steel

MOUNTS EXTERIOR WOOD PROFESSIONAL AND PERMANENTLY

The L-GoFix 5.0 mm is replaced by the SIHGA® TeFix® 5.0 mm stainless steel screw!

In mounting pack or object pack incl. assembly instructions, pencil S1 and SIHGAFIX stainless steel.
The protected L-GoFix® MS multistage head combines high pullout force with a very small head diameter.
The plane head conclusion gives the area a clean, elegant appearance, thereby increasing the constructive wood protection. For softer woods such as Larch, Douglas fir, pine, is the L-GoFix® MS to blow up without pre-drilling, with no pre-sinking and without the wood, simple and clean screwed from above! For harder woods such as Tropical woods or thermo-modified wood should be pre-drilled with the TerrassenFix® countersink TFB / ES II.
The special SIHGA® tip guarantees very quickly attached. The integrated milling splines on the shaft and the sliding coating ensure easy screwing. Sharp thread flanks provide optimum seating in wood. These features enable universal use, even in OSB the L-GoFix® MS optimal screw to. SIHGA® Tip: For optimum constructive wood protection and to reduce the shear on screws (by the swelling / shrinking behavior of the timbers), we recommend the use of TerrassenFix® II TF or KompeFix® II KF.