GUMO LGD 200 x 185 mm serve as a pressure distribution plate for LIFTO terrace feet.GUMO LGD are granulate-based underlays and pressure distributors for terrace substructures.

SIHGA GoFix MS II is ideal for outdoor use, in the case of pergolas or carports, which are not exposed to direct weathering. The SC 7 coating has a 10 times higher corrosion protection than conventional zinc plating.Your benefit:     Fixed wood on wood up to 500 mm, even OSB boards     Without pre-drilling and without pre-drilling is screwed     A special multi-stage head reduces the gap effect in the wood     Saves 50% of storage, combined with countersunk head and disk head     Transmits high forces, is nevertheless retractable and allows close-fitting screwing     Attaches pressure-resistant insulation materials for ridge insulation     Significantly increased corrosion protection, can be painted over     For applications in the corrosivity category C4-lang or C5-mittel     Special milling ribs on the shaft and sliding coating     Pre-drilling effect, easy insertion, low-noise SIHGA® screw tip     Quick assembly, easy-to-use and time-saving     Including SIHGAFIX®, Systemstift® and assembly instructions     Time-saving, practical, precise, complete accessories are packed; SIHGAFIX® also screws in deep grooves     SIHGA® MSZ wheel for diameter 8 mm     This ornamental disc MSZ increases the pulling force of the head further to 9 kN; Visually very nice and high traction     Positive appraisal for processing with impact wrenches     Saves time and provides security, even when working overhead     ETA European technical approval with external monitoring     Reliable, externally monitored values ​​provide safety during processing and exclude quality fluctuations

For optimal application of Decking Oil and Osmo Hardwax-Oil.

Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Transparent, lightly pigmented, satin, for exterior use Highly recommended for all vertical wood surfaces in outdoor areas: timber cladding, roof soffits, balcony cladding, windows and doors etc. As a top coat on colour treated wood, UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process with a UV protection factor 12 in comparison to untreated wood. The finish contains active ingredients for the preventive protection of the coating against mould, algae and fungal attack. Number of coats: two coats on untreated wood, for renovation one coat applied to a clean and dry surface suffices – without sanding! Can sizes: 0.75 L; 2.50 L 1 litre covers approx. 18 m² with one coat.

For naturally greying wooden façades and garden woods Ageing with style and the effective Greying Wood Stain for outdoors. The SAICOS Greying Wood Stain evens out the transition from heavily greyed areas to natural, even and flowing wood greying. This special wood stain for outdoors protects in a natural way and is particularly hard-wearing: The natural oils penetrate deep into the wood, offer optimal wood protection from the inside and keep it elastic. The polymer dispersion protects the surface against weather and moisture.  Benefits Equalizes the transition to natural, even greyingJust 1 coat is enough for an appealing result on the woodFast drying wood stain for outdoorsWood protection for all weatherWater-based Visually, new woods can be easily adapted to older ones The Wood Stain for exterior with greying effect is weather-resistant, easy to care for, breathable, water- and dirt-repellent and is suitable for both smooth and rough sawn wood. One coat is enough, the rest of the greying is done by nature. With the Wood Stain for surfaces coated on the outside, washing or cleaning can be done easily with water. SAICOS Green-Ex Concentrate is very well-suited for particularly stubborn stains and can be used outdoors in combination with the Wood Stain. The item is available in two colours: Graphite grey and stone grey. Depending on the use, the coating result can be different - this again ensures a particularly authentic wood look. SAICOS Greying Wood Stain is a transparent wood stain for outdoors and is based on our proven oil-polymer dispersion. The oil-modified paint is open-pore, weather-resistant, easy to care for, water- and dirt-repellent. It is suitable for smooth and rough sawn wood and is quick drying. One coat is enough to create natural greying. The wood stain for outdoor areas bonds permanently with the wood surface. It is breathable, moisture regulating, does not tear and does not peel.

Removes old Decking-Oils and wood stains uniformly and effectively PRODUCT DESCRIPTION
Ready-to-use, viscous paint remover especially developed for removing old existing oil surface finishes in outdoor areas. Afterwards the surface can be degreyed with Osmo Wood Reviver Power-Gel and then re-oiled.RECOMMENDED USE
Osmo Paint Remover Gel removes old Decking-Oils and wood stains on timber decking and garden furniture made of wood. Ideal for removing oil-based surface finishes on partially weathered timber decking so that an overall oil-free wood surface is achieved.INGREDIENTS
Osmo Paint Remover Gel contains Aqua, Xanthan Gum, Sodium Hydroxide, Potassium Hydroxide. Detailed declaration of ingredients available upon request. TECHNICAL DATA
Specific weight: (density): 1.05 g/cm3 +/- 0.05 g/cm3 pH value: 11.0-11.5STORAGE
Up to 2 years and longer if kept dry, closed tightly and stored in the original container. Do not expose to frost or temperatures over 30 °C!SURFACE PREPARATION
Before the application, remove any debris from the surface with a broom or hand broom.
Cover all areas that should not be treated.
Osmo Paint Remover Gel is ready to use. Do not thin. Stir well before and during use as some separation in product may occur after some time.
Before treatment with Osmo Paint Remover Gel, test the subsurface. A trial application is absolutely.APPLICATION necessary! Suitability, reaction time and required application amount can be determined on representative trial area. Caution should be taken when used on veneers! Veneers may loosen from substrate.METHODS OF APPLICATION
With a brush or Osmo Decking Cleaning Brush, apply product thick enough (approx. 200 ml/m2) on the dry surface to be cleaned, and allow to react for 60 minutes (but not longer than needed!).
Keep surface damp during reaction time (e.g. with a spray bottle). Afterwards scrub the surface with a lot of clear water along the wood grain. After drying, inspect the wood surface and repeat the process if necessary. Residues from Paint Remover Gel can have a negative influence on the drying and adhesive properties of subsequent coatings.
Therefore, it is absolutely essential to thoroughly rinse the surface after treatment. If the wood surface should be re-oiled, the surface must be neutralized and degreyed with Osmo Wood Reviver Power-Gel after drying.CLEANING OF TOOLS
Immediately after use, with soap and water.DRYING TIME
Allow to dry for at least 48 hours (normal climatic conditions, 23 °C/50 % rel. humidity) before applying a new surface finish. Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.COVERAGE
1 litre covers approx. 5 m2 with one application.NOTE
Cover all areas that should not be treated, such as sensitive plants, porous substrates (e.g. lightly coloured pebble dashed concrete, render etc.), aluminium, zinc or lacquered surfaces. Have mop water ready to rinse any surfaces (e.g. aluminium, zinc or lacquered areas) that have accidentally come into contact with the gel. Please wear safety gloves and goggles.

Continuously protects the substructure and prevents surface friction noises from aluminium substructures.A self-protection and isolating band for substructures made of wood and aluminium. GUMO K protects the wooden substructure permanently against dirt and water retention and acts as a separation layer between two surfaces (hidden fastening clip and substructure) prone to friction.Length: 10 m RollWidth: 75 mmMaterial: butyl blackSpecial feature: self-adhesive, elasticized

Terraces are exposed to external weather conditions all year round and thus change their surface. They turn gray and become dirty. To prolong the life of wooden decking, regular cleaning is essential. Advantages:For cleaning wooden terracesNatural bristlesThread for standard handlesApplicable with all SAICOS cleaners for outdoor useSize: 200mm Easy handling, thorough resultThis brush was developed for the thorough cleaning of wooden terraces. In combination with SAICOS cleaners for outdoor use, it removes dirt and coatings in no time. The natural bristles of the brush reach even deep-seated dirt. Thanks to the thread, a standard handle can be screwed on and the tedious scrubbing on the knees is over.

Especially developed for windows and doors – extremely water-repellent, weatherproof and UV-stable!Opaque, satin, for the exterior.Highly recommended for windows and doors.Osmo Opaque Gloss Wood Stain is water-repellent, weatherproof and UV-stable. The finish is easy to apply and offers great coverage.Number of coats: Two coats on raw wood. For renovation generally one coat applied thinly to the clean and dry surface is sufficient - no sanding required!Can sizes: 0.75 L; 2.50 L1 litre covers approx. 20 m2, with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

SIHGA GleitFix is a further development of the SIHGA DielenFix.Now also for start and end boardsNew are special fasteners for the start and end of a terrace. With GleitFix AE, Sihga has also succeeded in screwing these boards invisibly from below. In this case, a metal spring, which is screwed onto the underside of the board, is threaded into a glass-fiber-reinforced plastic plate which is fastened to the substructure. A special balancing system takes into account the swelling and shrinkage behavior of the wood. Now the edgeboards have the same look and longevity as the rest of the terrace. The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix GF can be used for nearly all types of wood with a width between 90 and 150 mm.Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces. The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection at GleitFix® AE CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:Type GleitFix® AE incl. BohrFix® stainless steelType GleitFix® AE CS incl. BohrFix® stainless steel A4

Anti-ageing for greyed outdoor wood The Power Gel works miracles. It cleans old wood and refreshes the colour. Benefits For garden furniture and wooden decks as well as hard and precious woodIntense gel textureGreyed outer timbersWithout grindingFrees wood from grey discolouration The high-quality special cleaner refreshes unsightly grey wooden surfaces outdoors and helps the wood shine anew. SAICOS Wood Brightener Power-Gel is easy to apply thanks to its gel-like texture. The wooden surface does not have to be sanded. The gel has an intense effect on the grey surface and reveals the original colour of the wood.

Optimal protection from the sun - transparent, lightly pigmented UV protection for outdoor areas Key Features Type: Colorless/transparent wood finish based on natural oils for exterior useFinish: Matt or silk matt, open-poredApplication Area: Vertical wood surfaces outdoors Advantages Allows wood to "breathe," reduces swelling and shrinkageWater-repellentDoes not crack, peel, or flakeRenovation-friendly: Can be painted over without sandingEasy and seamless applicationDoes not dry out during application UV Protection Performance Delays graying on vertical surfaces by a factor of 12 (compared to untreated wood)Contains preventive protection against mold, algae, and fungal infestation Areas of Application Dimensional Components Doors, windows, shutters Non-Dimensional Components Carports, wooden facades, balconies, fences, pergolas, garden sheds Ingredients Natural plant oils (sunflower, soybean, safflower, and linseed oil)Iron oxide and organic pigmentsTitanium dioxide (white pigment)Driers and additivesBiocidal active ingredient: 3-Iodo-2-propynyl butylcarbamate (IPBC)De-aromatized test gasoline (benzene-free) Application Instructions Number of Coats Untreated wood: 2 coatsRenovation: 1 coat on cleaned surface (no sanding required) Storage Shelf life: 5+ years when kept sealed in original containerFrost damage: If thickened due to frost, store at room temperature for 24 hours before use Additional Information Detailed full declaration available upon request This product provides a practical, long-lasting, and environmentally friendly solution for protecting exterior wood surfaces, with a special focus on UV protection and ease of use during renovations. 1 litre covers approx. 18 m² with one coat.

Special set for treating floors. For optimal application of Osmo Hardwax-Oil. Optimal floor finish – microfibre roller holds a large amount of product and distributes evenly.Multiple-use tray due to tray inserts – very economical.Inserts also available separately.

For the professional user! SAICOS Hard Wax Oil Raw Look is an open-pored special primer. Advantages preserves the raw wood look oxidative drying special for light European wood species based on natural and plant-based raw material slow odour during application High-quality one-coat systemSAICOS Hard Wax Oil Raw Look is an open-pored special primer that preserves the natural and uncoated character of light European wood species (raw wood look of e.g. oak, ash, beech etc.). It is healthy for living and suitable for wood - based on natural plant-based raw materials - moisture-regulating, breathable, reduces swelling and shrinkage. SAICOS Hard Wax Oil Raw Look is low-odour and odourless after drying, and the natural oils penetrate particularly deeply into the wood, protecting it from the inside and keeping it elastic. Floors treated with SAICOS Hard Wax Oil Raw Look and SAICOS Premium Hard Wax Oil are dirt and water repellent and extremely hard-wearing. Coffee, wine or aggressive fruit juices cannot penetrate and can be easily removed. Moisture cannot harm the open-pored coating. SAICOS Hard Wax Oil Raw Look bonds permanently with the wood - so there is no need to sand it down when renovating. Usage 1 x SAICOS Hard Wax Oil Raw Look1 x SAICOS Premium Hard Wax Oil in the desired gloss level Consumption Consumption is approx. 15 g/m² per application, resulting in a yield per litre of approx. 65 m². Preparation The surface to be treated must be clean and dry (wood moisture max. 12 %). Stain or sand varnished wood (final sanding 120 - 150 grit). Remove sanding dust thoroughly. Application Application with pad machine. SAICOS Hard Wax Oil Raw Look is ready to use - do not dilute. Stir well before use. Roll the product evenly onto 5-6 m2 of surface in strips approx. 20 cm apart (Saicos Oil/Wax Roller) and then polish in with a single disc machine and white pad. This product can also be applied by machine.

Leveling or grinding - the pads for 40 cm single disc machines.Pads for grinding, cleaning and leveling. Size: 16 "/ 406 mm Apply oil-based coatings evenly or sand floor coverings - the SAICOS Superpads are easy to use and lead to the desired result. The right pad for every floor.Four pads for different areas of application:> The white pad is suitable for the cloud-free leveling of oily paints.> The green pad is used for sanding and cleaning, for example, PVC or design floors.> The black pad is ideal for intermediate sanding.> The beige pad is intended to be solvent-free for the Ecoline hard wax oil.

Small paint tray, for use with the SAICOS products.Size: 15 x 30 cmTray Inserts can be ordered separately in 5-piece sets.

For filling small joints!OSMO WOOD PUTTY is a clear polymer dispersion for filling cracks and joints in sanded wooden flooring or parquet. Extremely high filling strength, short drying times and good sanding properties create a quality product. Fugenkittlösung is combined with sanding dust, and thus it offers a big advantage in that it matches the colour of subsurface exactly.ADVANTAGES >  High filling power>  Quick drying>  Good sanding properties>  Low odour>  Sizes: 1.00 L; 5.00 L>  1 litre covers approx. 10-15 m².APPLICATIONBefore applying, stir well in a bucket so that any settlement is mixed in.Mix in sanding dust, best from the same type of wood with a grit 80-120, into thick paste (approx. 15 % weight increase by adding sanding dust).Fill in flooring diagonally with a stainless steel double blade scraper and at the same time press wood putty firmly into joints. Repeat process if necessary.After 30 – 60 minutes the dried paste can be sanded coarsely (grit P80) and afterwards finely sanded (grit P100 – 120) so that no wood putty is left on the surface of the parquet. In most cases, fine sanding with P100 – 120 is enough.Treatment with any oil-and-wax-based wood finish from Osmo can be carried out afterwards.Note: As wood putty mixture and application strongly depends on wood species and sanding dust, a trial application is absolutely necessary! Do not fill joints in sprung or plank flooring!

PROFILED SELF-TAPPING SCREW Designed to efficiently drill through metal. High breaking strength and the special geometry gives this screw the properties to achieve a perfect fit. Length: 35 - 70 mmDiameter: 5,5 mmHead: 3-Step-Head

Paint roller with ergonomic handle The practical extension for all SAICOS paint rollers. Attach the roller, then you're ready to go. Benefits Professional qualityErgonomic plastic handleCan be combined with all SAICOS paint rollers and the SAICOS telescopic handle with click connection2 sizes: 100mm or 250mmIndispensable when working with paint rollers You can't do without it. The SAICOS handles can be used for all SAICOS rollers (Universal Roller, Oil/Wax-Roller and Aqua-Roller). They can also be combined with the SAICOS telescopic handle with click connection.

Microfibre pad for removing dirt and moisture from the floor whilst cleaningPerfect for cleaning, care and maintenance, refreshing or renovating oiled surfaces, also suited for coloured primers

For oil & water systems.Sizes:30 mm50 mm60 mm100 mm

It is essential for the durability of terraces is that the planks (decking) are infringed neither at the top nor at the lateral edges - exactly these important conditions are met the DielenFix®. His height of 6 mm ensures perfect constructive wood protection to the substructure and ensures optimally ventilating tete terrace - an essential criterion for the life of terraces. The enclosed SIHGA Bohrfix system screws for fastening to the substructure are specially manufactured without drilling for mounting on aluminum or wood and have a length of 29 mm. SIHGA DielenFix quantity calculation:To determine the amount required, we recommend the following auxiliary formula:Total linear meters of the substructure / plank width including gap x 2Using the example of a terrace with a 15 meter substructure, hallway width 144 mm, 6 mm groove:15 / 0.150 x 2 = 200 pieces    The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 6 mm for optimum aeration and ensures optimum constructive wood protection at DielenFix® II DF CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced in different materials or equipped with different fastening screws:Type DielenFix® II DF incl. BohrFix® stainless steelType DielenFix® II DF CS incl. BohrFix® stainless steel A4Type DielenFix® DF incl. BohrFix® stainless steel

RELO W reversible joist can be installed on both sides, either with a flat surface or with the ventilation channel on top depending on the fixing system used. The unique combination of structural design and overall dimensions ensures extremely high stability and load bearing capacity.

the original from SIHGA®the first Quadro attachment for use in cordless screwdrivers, hammer screwdrivers, chucks and bit holders  length 60 mm, 77 mmalso screws easily in deep grooves  also made from hardened stainless steelprevents rust from external sources occurring at the screw  vacuum ice-chill hardenedfor extreme high strength and long lifespan  precisely milled drive zoneresulting in a very accurate fit  made in GermanyGerman tested workmanship for reliable quality  colour-coding systemeach bit size is clear at first glance