SIHGA® DielenFix® DF

BASO is a spacer for ventilation and prevents waterlogging between the decking and the substructure. The integrated glass fiber reinforced spring elements contribute to a secure connection, prevent noise generation and increase walking comfort. Overview Dimensions:Length 80 mm | Width 25 mm | Height 6 mmJoint spacer 4 mmJoint spacer 7 mmMaterial:PP Polypropylene Recycled blackUV and weather resistantFastening type:Distance spacer for visible screw connections

The concealed decking connector TENI guarantees a very simple, fast and safe installation for modified, dimensionally stable wood species and compound decking boards with lateral cove.
The fastening system is characterized by two independently functioning fix and gliding point receptacles. The flexible and permanently elastic sliding point is automatically brought into position by the angled screw connection in the substructure. Natural dimensional changes per plank are compensated for via the pretensioning force generated. Swelling processes are not passed on to the neighboring plank - each decking plank works for itself - no chain reaction in the area.
The rigid fixed point ensures optimal positioning of the plank and enables safe installation without additional aids such as clamping tools or plank clamps. The 8 mm thick decking connector ensures perfect rear ventilation and structural protection of the components.
A safety device integrated in the base plate prevents the planks from being pushed out sideways.
If necessary, the planks can be replaced quickly and easily thanks to an integrated fold-out mechanism. The decking connector can be modified for the start and end planks. There is no need for a separate connector. TENI decking connectors can be installed on a wood or wood-like substructure and on the RELO T aluminum system rail.OverviewFastening: ConcealedType of fastening: Sliding and fixed pointJoint spacing: 6.0 mmDecking board: For modified, dimensionally stable wood types and compound planks with lateral covePlank exchange: Possible due to fold-out mechanismMaterial: POM polyoxymethylene, UV and weather resistantSpecial feature: Modification to start, end connector

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

Each PU contains the UNIA1 system screws 4.2 x 17 mm or 4.2 x 22 mm, 4.2 x 28 mm, 1 STK HELPO assembly aid and assembly instructions required for assembly.Regardless of the board geometry this is implemented quickly with the DILA decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging.Fixing: concealed systemFixing type: sliding and fixed pointSpace distance: selectableDecking board: all soft and hardwoodsBoard length: all board lengthsBoard repl.: possible Material: A2 Stainless steel / black Special feature: system screws includedDILA2 quantity calculation:We recommend the following auxiliary formula to determine the required quantity:Total running meters of the substructure / board width including joint x 2Using the example of a terrace with 15 running meters of substructure, board width 144 mm, joint 6 mm:15: 0.150 x 2 = 200 piece

for invisible fastening of decking boardsThe decking glider allows decking boards to be fastened indirectly / invisibly. This means that no screw heads are visible on the decking surface. This fastener is suitable for decking boards with side grooves as well as those without side grooves.The decking glider can be used either in combination with classic wooden substructures or with our modern aluminium system profile and HKP aluminium decking support system.AdvantagesIndirect/ invisible fastening solution
Supports constructive wood protection 
Weather-resistant
Application notes 
We recommend using the decking glide only with low-movement decking.
Low-movement decking includes the following types of wood, treatment methods and composite materials: 
Larch
Douglas fir
Wood-polymer composites (WPC)
Thermowoods made from softwoods & hardwoodsAcetylated woodThe use of decking gliders is not recommended for woods with high bulk density and/or high swelling and shrinkage and only moderate stability (dimensional stability). This applies in particular to the wood species cumarú, ipé, massaranduba and robinia (false acacia).When selecting wood, particular emphasis should also be placed on good cut sorting (including sorting out boards with interlocking growth and so-called "fladder boards") as well as good conditioning (setting the equalisation moisture content) of the decking boards.Furthermore, a joint dimension between the boards that is matched to the type of wood, wood moisture and board width is essential for a durable construction. Information on this can be obtained from your timber dealer.The decking glide is available in two versions:Decking glideBoard width: 80 - 160 mmBoard thickness: 20 - 30 mmDecking glide MiniPlank width: 90 - 100 mmPlank thickness: ≥20 mmProcessing:To fasten the boards, the glides are first screwed to the underside of the boards and then to the substructure from above. This type of fastening avoids a direct connection between the decking boards and the substructure. The decking boards therefore have greater freedom of movement (via the decking glide).We recommend using two screws per decking glide for fastening the decking glide to the board and two screws for fastening the decking glide to the substructure.For the Mini decking glider, you should use two screws for fastening the Mini decking glider to the board and one screw for fastening it to the substructure.

Regardless of the board geometry this is implemented quickly with the DILA C decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging. Each package contains the UNIA1 system screws 4.2 x 22 mm and 4.2 x 33 mm required for installation. 1 piece HELPO mounting aid and assembly instructions. Fixing: concealed systemFixing type: sliding and fixed pointJoint distance: selectableDecking board: For domestic and modified wood species 19 - 32 mmBoard replacement: possible when boards joints are over 6,0 mmMaterial: PA6 30 GF black plasticTension arm: Flexible designUNIA drilling capacity: ca. 3 mm thick AluminiumSpecial feature: start and end clip modification

THE UNIVERSAL SPACER By FugiFix® FF can be easily generated in facade construction and in building terraces a precisely uniform joint. The easy handling is joint widths can be from 5, 6, 7 and 8 mm adjust easily. (Joint 8 mm for façade application mögich) The specially developed geometry of FugiFix® FF makes it extremely simple to create an optimal joint appearance, both invisible and visible at fixings. The FugiFix® FF holds independently in any position. The FugiFix® FF is always fixed on the visible surface and therefore can not fall through the gap. By destructive removing an unlimited re-use is possible.

The substantial increase longevity of wooden deckings. Even joints are to be made with the simplest TerrassenFix® II TF.Simultaneously, the 6 mm thick TerrassenFix® II TF ensures optimum constructive wood protection, that is, between decking and substructure is optimally ventilated and prevented waterlogging. Another important advantage is that the screws are not loaded for shearing but to bending through the use of TerrassenFix® II TF.The TerrassenFix® II TFS pin enables the quick adjustment of the joint width during assembly and is then completely removed again - very important so that the decking will not be blocked in their natural swelling and shrinking processes!The TerrassenFix® II TF does not have to be laboriously screwed on the substructure, but is merely placed. The special material increases walking comfort on the terrace!Total offers TerrassenFix® II TF tremendous relief and reduction of working time and a significant extension of the life of terraces.

SIHGA GleitFix is a further development of the SIHGA DielenFix.The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix can be used for nearly all types of wood with a width between 90 and 150 mm.Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces.Also new is a special attachment for the initial and end boards. Now these can also be fixed invisibly: GleitFix AE SIHGA DielenFix quantity calculation:To determine the amount required, we recommend the following auxiliary formula:Total linear meters of the substructure / plank width including gapUsing the example of a terrace with a 15 meter substructure, hallway width 144 mm, 6 mm groove:15 / 0.150  = 100 pieces The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection at GleitFix® GF CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:Type GleitFix® GF incl. BohrFix® stainless steelType GleitFix® GF CS incl. BohrFix® stainless steel A4

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

THE UNIVERSAL SPACER By FugiFix® FF can be easily generated in facade construction and in building terraces a precisely uniform joint. The easy handling is joint widths can be from 5, 6, 7 and 8 mm adjust easily. (Joint 8 mm for façade application mögich) The specially developed geometry of FugiFix® FF makes it extremely simple to create an optimal joint appearance, both invisible and visible at fixings. The FugiFix® FF holds independently in any position. The FugiFix® FF is always fixed on the visible surface and therefore can not fall through the gap. By destructive removing an unlimited re-use is possible.

THE UNDER CONSTRUCTION RAIL BRINGS UP TO 50% TIME SAVING! A successful combination (symbiosis) of the positive properties of aluminum and weather-resistant wood. The stable and distortion-free aluminum allows absolutely flat substructure, which eliminates costly counter batten construction. The integrated timber ensures long-lasting hold of the claimed on train and shear bolts. Thus, the often occurring problems such as "be easy" or "pull" the attachment screws professionally solved permanently on aluminum.SymbioFix® SFT provides the perfect constructive wood protection! The 5 mm distance between mounting SymbioFix® SFT and hallway ensures perfect ventilation of the terrace and thus for long life of the floorboards while the optimum freedom of movement in shear (due to the swelling and shrinking processes of the planks) claimed screws ensures.SymbioFix® SFT is not suitable for visible screw the decking, as well as prefabricated elements and enables an extremely fast and easy set up of terraced substructure. We recommend for professional, non-visible screw DielenFix®SymbioFix® SFT is ideal for visible screw the decking. We recommend for professional continuous screw L-BohrFix® MB.For visible screwing the terrace covering the boards are pre-drilled.For aluminum substructure the deck covering the SymbioFix®Bohrer SFB drill 6 mm. SymbioFix® SFT, also ideal to combine with JustiFix® II JK SF.The most immediate result of the special lateral ventilation ducts jet effect makes them suitable for wicking in SymbioFix® SFT rail.

SIHGA® TEBIT® rust-free holds the screw without a magnet and prevents extraneous rust     special bit with hold function     the screws remain without holding on and without a magnet on the bit     also enables assembly overhead and difficult to access     saves time and money, especially with small screw dimensionsTEBIT® is included with Tefix®, GleitFix® GF and DielenFix® DF

the original from SIHGA®the first Quadro attachment for use in cordless screwdrivers, hammer screwdrivers, chucks and bit holders  length 60 mm, 77 mmalso screws easily in deep grooves  also made from hardened stainless steelprevents rust from external sources occurring at the screw  vacuum ice-chill hardenedfor extreme high strength and long lifespan  precisely milled drive zoneresulting in a very accurate fit  made in GermanyGerman tested workmanship for reliable quality  colour-coding systemeach bit size is clear at first glance

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

SIHGA GleitFix is a further development of the SIHGA DielenFix.The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix can be used for nearly all types of wood with a width between 90 and 150 mm.Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces.Also new is a special attachment for the initial and end boards. Now these can also be fixed invisibly: GleitFix AE SIHGA DielenFix quantity calculation:To determine the amount required, we recommend the following auxiliary formula:Total linear meters of the substructure / plank width including gapUsing the example of a terrace with a 15 meter substructure, hallway width 144 mm, 6 mm groove:15 / 0.150  = 100 pieces The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection at GleitFix® GF CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:Type GleitFix® GF incl. BohrFix® stainless steelType GleitFix® GF CS incl. BohrFix® stainless steel A4

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

Regardless of the board geometry this is implemented quickly with the DILA C decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging. Each package contains the UNIA1 system screws 4.2 x 22 mm and 4.2 x 33 mm required for installation. 1 piece HELPO mounting aid and assembly instructions. Fixing: concealed systemFixing type: sliding and fixed pointJoint distance: selectableDecking board: For domestic and modified wood species 19 - 32 mmBoard replacement: possible when boards joints are over 6,0 mmMaterial: PA6 30 GF black plasticTension arm: Flexible designUNIA drilling capacity: ca. 3 mm thick AluminiumSpecial feature: start and end clip modification

THE UNIVERSAL SPACER By FugiFix® FF can be easily generated in facade construction and in building terraces a precisely uniform joint. The easy handling is joint widths can be from 5, 6, 7 and 8 mm adjust easily. (Joint 8 mm for façade application mögich) The specially developed geometry of FugiFix® FF makes it extremely simple to create an optimal joint appearance, both invisible and visible at fixings. The FugiFix® FF holds independently in any position. The FugiFix® FF is always fixed on the visible surface and therefore can not fall through the gap. By destructive removing an unlimited re-use is possible.

The substantial increase longevity of wooden deckings. Even joints are to be made with the simplest TerrassenFix® II TF.Simultaneously, the 6 mm thick TerrassenFix® II TF ensures optimum constructive wood protection, that is, between decking and substructure is optimally ventilated and prevented waterlogging. Another important advantage is that the screws are not loaded for shearing but to bending through the use of TerrassenFix® II TF.The TerrassenFix® II TFS pin enables the quick adjustment of the joint width during assembly and is then completely removed again - very important so that the decking will not be blocked in their natural swelling and shrinking processes!The TerrassenFix® II TF does not have to be laboriously screwed on the substructure, but is merely placed. The special material increases walking comfort on the terrace!Total offers TerrassenFix® II TF tremendous relief and reduction of working time and a significant extension of the life of terraces.

Each PU contains the UNIA1 system screws 4.2 x 17 mm or 4.2 x 22 mm, 4.2 x 28 mm, 1 STK HELPO assembly aid and assembly instructions required for assembly.Regardless of the board geometry this is implemented quickly with the DILA decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging.Fixing: concealed systemFixing type: sliding and fixed pointSpace distance: selectableDecking board: all soft and hardwoodsBoard length: all board lengthsBoard repl.: possible Material: A2 Stainless steel / black Special feature: system screws includedDILA2 quantity calculation:We recommend the following auxiliary formula to determine the required quantity:Total running meters of the substructure / board width including joint x 2Using the example of a terrace with 15 running meters of substructure, board width 144 mm, joint 6 mm:15: 0.150 x 2 = 200 piece

for invisible fastening of decking boardsThe decking glider allows decking boards to be fastened indirectly / invisibly. This means that no screw heads are visible on the decking surface. This fastener is suitable for decking boards with side grooves as well as those without side grooves.The decking glider can be used either in combination with classic wooden substructures or with our modern aluminium system profile and HKP aluminium decking support system.AdvantagesIndirect/ invisible fastening solution
Supports constructive wood protection 
Weather-resistant
Application notes 
We recommend using the decking glide only with low-movement decking.
Low-movement decking includes the following types of wood, treatment methods and composite materials: 
Larch
Douglas fir
Wood-polymer composites (WPC)
Thermowoods made from softwoods & hardwoodsAcetylated woodThe use of decking gliders is not recommended for woods with high bulk density and/or high swelling and shrinkage and only moderate stability (dimensional stability). This applies in particular to the wood species cumarú, ipé, massaranduba and robinia (false acacia).When selecting wood, particular emphasis should also be placed on good cut sorting (including sorting out boards with interlocking growth and so-called "fladder boards") as well as good conditioning (setting the equalisation moisture content) of the decking boards.Furthermore, a joint dimension between the boards that is matched to the type of wood, wood moisture and board width is essential for a durable construction. Information on this can be obtained from your timber dealer.The decking glide is available in two versions:Decking glideBoard width: 80 - 160 mmBoard thickness: 20 - 30 mmDecking glide MiniPlank width: 90 - 100 mmPlank thickness: ≥20 mmProcessing:To fasten the boards, the glides are first screwed to the underside of the boards and then to the substructure from above. This type of fastening avoids a direct connection between the decking boards and the substructure. The decking boards therefore have greater freedom of movement (via the decking glide).We recommend using two screws per decking glide for fastening the decking glide to the board and two screws for fastening the decking glide to the substructure.For the Mini decking glider, you should use two screws for fastening the Mini decking glider to the board and one screw for fastening it to the substructure.

BASO is a spacer for ventilation and prevents waterlogging between the decking and the substructure. The integrated glass fiber reinforced spring elements contribute to a secure connection, prevent noise generation and increase walking comfort. Overview Dimensions:Length 80 mm | Width 25 mm | Height 6 mmJoint spacer 4 mmJoint spacer 7 mmMaterial:PP Polypropylene Recycled blackUV and weather resistantFastening type:Distance spacer for visible screw connections

The concealed decking connector TENI guarantees a very simple, fast and safe installation for modified, dimensionally stable wood species and compound decking boards with lateral cove.
The fastening system is characterized by two independently functioning fix and gliding point receptacles. The flexible and permanently elastic sliding point is automatically brought into position by the angled screw connection in the substructure. Natural dimensional changes per plank are compensated for via the pretensioning force generated. Swelling processes are not passed on to the neighboring plank - each decking plank works for itself - no chain reaction in the area.
The rigid fixed point ensures optimal positioning of the plank and enables safe installation without additional aids such as clamping tools or plank clamps. The 8 mm thick decking connector ensures perfect rear ventilation and structural protection of the components.
A safety device integrated in the base plate prevents the planks from being pushed out sideways.
If necessary, the planks can be replaced quickly and easily thanks to an integrated fold-out mechanism. The decking connector can be modified for the start and end planks. There is no need for a separate connector. TENI decking connectors can be installed on a wood or wood-like substructure and on the RELO T aluminum system rail.OverviewFastening: ConcealedType of fastening: Sliding and fixed pointJoint spacing: 6.0 mmDecking board: For modified, dimensionally stable wood types and compound planks with lateral covePlank exchange: Possible due to fold-out mechanismMaterial: POM polyoxymethylene, UV and weather resistantSpecial feature: Modification to start, end connector

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK