SIHGA® JustiFix® K 250 x 250 x 2 mm

THE UNDER CONSTRUCTION RAIL BRINGS UP TO 50% TIME SAVING! A successful combination (symbiosis) of the positive properties of aluminum and weather-resistant wood. The stable and distortion-free aluminum allows absolutely flat substructure, which eliminates costly counter batten construction. The integrated timber ensures long-lasting hold of the claimed on train and shear bolts. Thus, the often occurring problems such as "be easy" or "pull" the attachment screws professionally solved permanently on aluminum.SymbioFix® SFT provides the perfect constructive wood protection! The 5 mm distance between mounting SymbioFix® SFT and hallway ensures perfect ventilation of the terrace and thus for long life of the floorboards while the optimum freedom of movement in shear (due to the swelling and shrinking processes of the planks) claimed screws ensures.SymbioFix® SFT is not suitable for visible screw the decking, as well as prefabricated elements and enables an extremely fast and easy set up of terraced substructure. We recommend for professional, non-visible screw DielenFix®SymbioFix® SFT is ideal for visible screw the decking. We recommend for professional continuous screw L-BohrFix® MB.For visible screwing the terrace covering the boards are pre-drilled.For aluminum substructure the deck covering the SymbioFix®Bohrer SFB drill 6 mm. SymbioFix® SFT, also ideal to combine with JustiFix® II JK SF.The most immediate result of the special lateral ventilation ducts jet effect makes them suitable for wicking in SymbioFix® SFT rail.

Ø 215 mm footprint  ONLY TWO MODELS FOR DISTANCES OF 30-500 MMSince the direct contact of the substructure is a terrace with the floor to be avoided, the JustiFix® II JK offers valuable assistance. Using the JustiFix® II JK waterlogging is prohibited under the terrace and ensuring good ventilation.At the same time it saves a lot of work, because the height adjustment can be carried out easily from above by means of rotational movement. Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed.Expansion distance range - a model for heights up to 500 mm: Just the top of the JustiFix® II JK stand out, one or more adapters JA 35 or 70 mm and then attach the upper part again. This process increases the distance range by 35 or 70 mm and can be repeated up to a total height of 500 mm as often. Application for a timber under construction on solid and rough terrain.The recommended load per JustiFix® II JK H is 6.0 kN.The amount needed per m2 depends on the dimension of the substructure. We recommend at wooden decks along the substructure at a distance of 700 mm - which gives an average of about 3.0 per m2.To assemble the JustiFix® II JK H is simply attached to the substructure side.

The fleece under the terrace Application on a natural surface.By JustiFix® JV you avoid ground contact your woods.In addition, the water-permeable fibrous structure inhibits plant growth under your patio.