LIFTO adjustable pedestal 35 - 55 mm

Ø 215 mm footprint  ONLY TWO MODELS FOR DISTANCES OF 30-500 MMSince the direct contact of the substructure is a terrace with the floor to be avoided, the JustiFix® II JK offers valuable assistance. Using the JustiFix® II JK waterlogging is prohibited under the terrace and ensuring good ventilation.At the same time it saves a lot of work, because the height adjustment can be carried out easily from above by means of rotational movement. Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed.Expansion distance range - a model for heights up to 500 mm: Just the top of the JustiFix® II JK stand out, one or more adapters JA 35 or 70 mm and then attach the upper part again. This process increases the distance range by 35 or 70 mm and can be repeated up to a total height of 500 mm as often. Application for a timber under construction on solid and rough terrain.The recommended load per JustiFix® II JK H is 6.0 kN.The amount needed per m2 depends on the dimension of the substructure. We recommend at wooden decks along the substructure at a distance of 700 mm - which gives an average of about 3.0 per m2.To assemble the JustiFix® II JK H is simply attached to the substructure side.

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site. Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

The adjustable X-base plate pedestal of the LIFTO K is sturdy and secure once in position. The height adjustment can be can be extended by simply inserting a adapter increasing the range permitting more flexibility during the installation process. Thanks to the adaptable components LIFTO K also permits the laying of patio tiles made of stone, concrete or ceramics. OverviewHeight range:50 - 80 mm  |  80 - 140 mm.  + AdapterAdapter KA60:+ 60 mm height adjustmentDimensions:LIFTO KU: Baseplate Ø 225 mm ǀ 90 mm support plate diameterLIFTO KS: Support plate Ø 120 mm ǀ Joint cross 3.2 mmMaterial:PP polypropylene Recycled black ǀ UV and weather resistantAccessories:UNIA 4.2 x 22 mm for fastening the pedestals to a wooden or aluminium substructureRELO A adapter for screwless fastening of the pedestals to RELO substructure joistsGUMO LGD/LGA pressure distribution pad for flat roof / LGA for aluminium foilLIFTO N automatic three-dimensional 4 % levelling / installation height + 15 mmLIFTO R regulating disc for stone slabs - thickness 1.2 or 2.0 mm

Thanks to the X base plate, the LIFTO terrace foot is variable in its positioning and securely in position. The stepless height adjustment can be significantly increased with simple intermediate adapters and thus offers maximal flexibility during installation.

GUMO LGD 200 x 185 mm serve as a pressure distribution plate for LIFTO terrace feet.GUMO LGD are granulate-based underlays and pressure distributors for terrace substructures.

Ø 215 mm footprint  ONLY TWO MODELS FOR DISTANCES OF 30-500 MMSince the direct contact of the substructure is a terrace with the floor to be avoided, the JustiFix® II JK offers valuable assistance. Using the JustiFix® II JK waterlogging is prohibited under the terrace and ensuring good ventilation.At the same time it saves a lot of work, because the height adjustment can be carried out easily from above by means of rotational movement. Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed.Expansion distance range - a model for heights up to 500 mm: Just the top of the JustiFix® II JK stand out, one or more adapters JA 35 or 70 mm and then attach the upper part again. This process increases the distance range by 35 or 70 mm and can be repeated up to a total height of 500 mm as often. Application for a timber under construction on solid and rough terrain.The recommended load per JustiFix® II JK H is 6.0 kN.The amount needed per m2 depends on the dimension of the substructure. We recommend at wooden decks along the substructure at a distance of 700 mm - which gives an average of about 3.0 per m2.To assemble the JustiFix® II JK H is simply attached to the substructure side.

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site. Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

Profi-Line adjustable pedestalsThe PRO adjustable pedestals are suitable for wooden and stone decking in various installation heights.The new Profi-Line adjustable pedestal series from Eurotec offers you a modular system: innovative, universal, flexible and user-friendly!The series consists of four adjustable pedestals of different heights. The height of these can be adjusted using extension rings:Eurotec adjustable pedestal PRO S 3.0 - 5.3 cmEurotec adjustable leg PRO M 5.3 - 8.2 cmEurotec adjustable leg PRO L 7.0 - 11.7 cmEurotec adjustable foot PRO XL 7.4 - 16.8 cmEurotec adjustable foot extension ring +4 cmEurotec adjustable foot extension ring +10 cmThe new adjustable leg series is completed by four different adapter types:L-adapter for classic wooden substructure or aluminium substructureClick adapter 40 for clicking in the Eurotec Eveco aluminium system profileClick adapter 60 for clicking in the Eurotec EVO and EVO Slim aluminium system profile and HKP support profileStone adapter for laying stone slabsThis means that the adjustable pedestals PRO can be quickly and easily customised to your individual requirements and conditions on site.Features/advantages:High load-bearing capacity of 8.0 kN/footBasic installation heights from 3.0 - 16.8 cmHeight extension possible using extension ringsQuick and easy assemblyInfinitely variable height adjustmentResistant to weathering, UV exposure, insects and rot

The adjustable X-base plate pedestal of the LIFTO K is sturdy and secure once in position. The height adjustment can be can be extended by simply inserting a adapter increasing the range permitting more flexibility during the installation process. Thanks to the adaptable components LIFTO K also permits the laying of patio tiles made of stone, concrete or ceramics. OverviewHeight range:50 - 80 mm  |  80 - 140 mm.  + AdapterAdapter KA60:+ 60 mm height adjustmentDimensions:LIFTO KU: Baseplate Ø 225 mm ǀ 90 mm support plate diameterLIFTO KS: Support plate Ø 120 mm ǀ Joint cross 3.2 mmMaterial:PP polypropylene Recycled black ǀ UV and weather resistantAccessories:UNIA 4.2 x 22 mm for fastening the pedestals to a wooden or aluminium substructureRELO A adapter for screwless fastening of the pedestals to RELO substructure joistsGUMO LGD/LGA pressure distribution pad for flat roof / LGA for aluminium foilLIFTO N automatic three-dimensional 4 % levelling / installation height + 15 mmLIFTO R regulating disc for stone slabs - thickness 1.2 or 2.0 mm