SIHGA® JustiFix® JV 1,6 x 10 m

Product information "SIHGA® JustiFix® JV 1,6 x 10 m"

The fleece under the terrace

Application on a natural surface.
By JustiFix® JV you avoid ground contact your woods.
In addition, the water-permeable fibrous structure inhibits plant growth under your patio.

YouTube Video "SIHGA® JustiFix® JV 1,6 x 10 m"
Downloads "SIHGA® JustiFix® JV 1,6 x 10 m"

Accessory Items

SIHGA® JustiFix® K 250 x 250 x 2 mm
Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

From €3.24*
SIHGA® JustiFix® J
Prevents direct contact of the substructure to the foundation Since the direct contact of the substructure is a terrace with soil or foundation to be avoided, the JustiFix® J provides indispensable support, especially when only low installation heights for the constructive wood protection exist.Using the J JustiFix® the waterlogging is prohibited under the terrace and ensuring good ventilation.By producing high-quality EDPM special rubber of JustiFix® J remains dimensionally stable even when exposed to heat, frost and UV influences! Simultaneously, the walking comfort is increased by the vibration damping effect!For the easy level adjustment between wood substructure and foundation of JustiFix® J is manufactured in three different material thicknesses.JustiFix® J is simply placed under the substructure and is arbitrarily stackable.

Content: 30 unit (€1.34* / 1 unit)

From €40.32*
SIHGA® JustiFix® Adapter JA
height expansion for JustiFix® II JK by 70 mm respectivelythe optimal addition to the adjustable foot, JustiFix® Adapter JA is simply inserted; this increases the height adjustment between substructure and foundation by up to 545 mm  made in Austriatop European quality and added-value  one model, can be stacked as desiredcan be used for all JustiFix® II JK  monitored production from polypropylene, with a special reciperemains permanently dimensionally stable, is heat-, frost- and UV-resistant

From €2.30*
SIHGA® JustiFix® II JM
Prevents direct contact of the supporting structure to the foundation. To eliminate waterlogging of JustiFix® II JM provides valuable assistance. At the same time it saves a lot of work, because the height adjustment can be carried out not only from below (with spanner SW 10) but also easily from the top (with a screwdriver). Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed on the foundation.The JustiFix® II JM is articulated in the weatherproof Kunststoffdämmelement, whereby he adapts very well to existing unevenness and increases walking comfort on the terrace with its vibration damping effect.Application on solid groundJM 40: height adjustment 25 - 40 mmJM 60: height adjustment 25 - 60 mmJM 80: height adjustment 25 - 80 mmThe recommended load per JustiFix® II JM is 1.20 kN. The exhibit compressive strength of insulation must be at least. 0.05 N / mm2 (50 kPa).The amount needed per m2 depends on the dimension of the substructure, often 4 pieces per m2 are installed, for example, at 600 mm spacing of the substructure.

From €4.26*

Similar Items

SIHGA® JustiFix® K 250 x 250 x 2 mm
Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

From €3.24*
SIHGA® JustiFix® J
Prevents direct contact of the substructure to the foundation Since the direct contact of the substructure is a terrace with soil or foundation to be avoided, the JustiFix® J provides indispensable support, especially when only low installation heights for the constructive wood protection exist.Using the J JustiFix® the waterlogging is prohibited under the terrace and ensuring good ventilation.By producing high-quality EDPM special rubber of JustiFix® J remains dimensionally stable even when exposed to heat, frost and UV influences! Simultaneously, the walking comfort is increased by the vibration damping effect!For the easy level adjustment between wood substructure and foundation of JustiFix® J is manufactured in three different material thicknesses.JustiFix® J is simply placed under the substructure and is arbitrarily stackable.

Content: 30 unit (€1.34* / 1 unit)

From €40.32*
SIHGA® JustiFix® Adapter JA
height expansion for JustiFix® II JK by 70 mm respectivelythe optimal addition to the adjustable foot, JustiFix® Adapter JA is simply inserted; this increases the height adjustment between substructure and foundation by up to 545 mm  made in Austriatop European quality and added-value  one model, can be stacked as desiredcan be used for all JustiFix® II JK  monitored production from polypropylene, with a special reciperemains permanently dimensionally stable, is heat-, frost- and UV-resistant

From €2.30*
SIHGA® JustiFix® II JM
Prevents direct contact of the supporting structure to the foundation. To eliminate waterlogging of JustiFix® II JM provides valuable assistance. At the same time it saves a lot of work, because the height adjustment can be carried out not only from below (with spanner SW 10) but also easily from the top (with a screwdriver). Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed on the foundation.The JustiFix® II JM is articulated in the weatherproof Kunststoffdämmelement, whereby he adapts very well to existing unevenness and increases walking comfort on the terrace with its vibration damping effect.Application on solid groundJM 40: height adjustment 25 - 40 mmJM 60: height adjustment 25 - 60 mmJM 80: height adjustment 25 - 80 mmThe recommended load per JustiFix® II JM is 1.20 kN. The exhibit compressive strength of insulation must be at least. 0.05 N / mm2 (50 kPa).The amount needed per m2 depends on the dimension of the substructure, often 4 pieces per m2 are installed, for example, at 600 mm spacing of the substructure.

From €4.26*

Accessory Items

SIHGA® JustiFix® K 250 x 250 x 2 mm
Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

From €3.24*
SIHGA® JustiFix® J
Prevents direct contact of the substructure to the foundation Since the direct contact of the substructure is a terrace with soil or foundation to be avoided, the JustiFix® J provides indispensable support, especially when only low installation heights for the constructive wood protection exist.Using the J JustiFix® the waterlogging is prohibited under the terrace and ensuring good ventilation.By producing high-quality EDPM special rubber of JustiFix® J remains dimensionally stable even when exposed to heat, frost and UV influences! Simultaneously, the walking comfort is increased by the vibration damping effect!For the easy level adjustment between wood substructure and foundation of JustiFix® J is manufactured in three different material thicknesses.JustiFix® J is simply placed under the substructure and is arbitrarily stackable.

Content: 30 unit (€1.34* / 1 unit)

From €40.32*
SIHGA® JustiFix® Adapter JA
height expansion for JustiFix® II JK by 70 mm respectivelythe optimal addition to the adjustable foot, JustiFix® Adapter JA is simply inserted; this increases the height adjustment between substructure and foundation by up to 545 mm  made in Austriatop European quality and added-value  one model, can be stacked as desiredcan be used for all JustiFix® II JK  monitored production from polypropylene, with a special reciperemains permanently dimensionally stable, is heat-, frost- and UV-resistant

From €2.30*
SIHGA® JustiFix® II JM
Prevents direct contact of the supporting structure to the foundation. To eliminate waterlogging of JustiFix® II JM provides valuable assistance. At the same time it saves a lot of work, because the height adjustment can be carried out not only from below (with spanner SW 10) but also easily from the top (with a screwdriver). Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed on the foundation.The JustiFix® II JM is articulated in the weatherproof Kunststoffdämmelement, whereby he adapts very well to existing unevenness and increases walking comfort on the terrace with its vibration damping effect.Application on solid groundJM 40: height adjustment 25 - 40 mmJM 60: height adjustment 25 - 60 mmJM 80: height adjustment 25 - 80 mmThe recommended load per JustiFix® II JM is 1.20 kN. The exhibit compressive strength of insulation must be at least. 0.05 N / mm2 (50 kPa).The amount needed per m2 depends on the dimension of the substructure, often 4 pieces per m2 are installed, for example, at 600 mm spacing of the substructure.

From €4.26*

Similar Items

SIHGA® JustiFix® K 250 x 250 x 2 mm
Cork interlayer as protection for flat roof foils protects against mechanical damage to the sealing level does not contain any plasticisers prevents a plasticizer migration between flat roof foil and adjustable feet optimal for adjustment feet JustiFix® JK (II) made of chemically neutral material cork is resistant to moisture, does not rot and is resistant against most acids cork as a flexible material inhibits impact sound, noise-insulating is non-slip and pressure-stable

From €3.24*
SIHGA® JustiFix® J
Prevents direct contact of the substructure to the foundation Since the direct contact of the substructure is a terrace with soil or foundation to be avoided, the JustiFix® J provides indispensable support, especially when only low installation heights for the constructive wood protection exist.Using the J JustiFix® the waterlogging is prohibited under the terrace and ensuring good ventilation.By producing high-quality EDPM special rubber of JustiFix® J remains dimensionally stable even when exposed to heat, frost and UV influences! Simultaneously, the walking comfort is increased by the vibration damping effect!For the easy level adjustment between wood substructure and foundation of JustiFix® J is manufactured in three different material thicknesses.JustiFix® J is simply placed under the substructure and is arbitrarily stackable.

Content: 30 unit (€1.34* / 1 unit)

From €40.32*
SIHGA® JustiFix® Adapter JA
height expansion for JustiFix® II JK by 70 mm respectivelythe optimal addition to the adjustable foot, JustiFix® Adapter JA is simply inserted; this increases the height adjustment between substructure and foundation by up to 545 mm  made in Austriatop European quality and added-value  one model, can be stacked as desiredcan be used for all JustiFix® II JK  monitored production from polypropylene, with a special reciperemains permanently dimensionally stable, is heat-, frost- and UV-resistant

From €2.30*
SIHGA® JustiFix® II JM
Prevents direct contact of the supporting structure to the foundation. To eliminate waterlogging of JustiFix® II JM provides valuable assistance. At the same time it saves a lot of work, because the height adjustment can be carried out not only from below (with spanner SW 10) but also easily from the top (with a screwdriver). Thereby, the fast and accurate mainly level orientation of the substructure is guaranteed on the foundation.The JustiFix® II JM is articulated in the weatherproof Kunststoffdämmelement, whereby he adapts very well to existing unevenness and increases walking comfort on the terrace with its vibration damping effect.Application on solid groundJM 40: height adjustment 25 - 40 mmJM 60: height adjustment 25 - 60 mmJM 80: height adjustment 25 - 80 mmThe recommended load per JustiFix® II JM is 1.20 kN. The exhibit compressive strength of insulation must be at least. 0.05 N / mm2 (50 kPa).The amount needed per m2 depends on the dimension of the substructure, often 4 pieces per m2 are installed, for example, at 600 mm spacing of the substructure.

From €4.26*