SIHGA® GleitFix® GF

SIHGA GleitFix is a further development of the SIHGA DielenFix.
The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix can be used for nearly all types of wood with a width between 90 and 150 mm.
Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces.

Also new is a special attachment for the initial and end boards. Now these can also be fixed invisibly: GleitFix AE

SIHGA DielenFix quantity calculation:
To determine the amount required, we recommend the following auxiliary formula:
Total linear meters of the substructure / plank width including gap
Using the example of a terrace with a 15 meter substructure, hallway width 144 mm, 6 mm groove:
15 / 0.150  = 100 pieces

The use:

• fastened planks not visible screwed; produced, developed and patented in Austria
• gives elegant appearance and safety of the screw
• suitable for almost all types of wood
• reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs
• Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration
• secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue
• Floorboards remain intact at all visible surfaces
• the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather
• like swelling and shrinkage of the wood from operations
• reduces the crack and fracture behavior of wood in these natural processes
• Choice of three screw lengths
• Possible use for all common hallway strengths 19-40 mm
• variable visible joint 0-15 mm, for each suitable builders
• Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection
• at GleitFix® GF CS A4 screws are enclosed
• time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment
• Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions
• no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies
• SIHGA® TIP: MAGBIT® facilitates assembly

For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:
Type GleitFix® GF incl. BohrFix® stainless steel
Type GleitFix® GF CS incl. BohrFix® stainless steel A4