The foundation for a perfect coat A good primer is very important for the coating of floors and furniture. It ensures that the wood is perfectly protected and the top coat adheres well. Benefits Indispensable as a first coat for floors and furniture made of hardwood / exotic woods in indoor areasAlso for floors and furniture in the bathroom and kitchenHealthy, moisture-regulating, breathable, dirt- and water-repellentOxidative dryingLow in odour Also suitable for wet rooms The open-pore special primer based on natural raw vegetable materials is healthy, breathable and reduces wood swelling and shrinkage. It penetrates particularly easily and deeply into the wood and protects it from the inside. Thanks to its moisture-regulating properties, it can be used safely in bathrooms or kitchens. Even spilled food cannot penetrate due to the dirt- and water-repellent surface and can be easily removed.We recommend SAICOS Premium Hardwax-Oil as a top coat.

FugiFix® FFZ is a simple and fast setup of the joints when laying decking is possible. In combination with the ferrule TerrassenFix® II TFZ and the FugiFix® FFZ, the hall can contracted in one step and the joint spacing of 6, 8 or 10 mm are set. Thus, the processor can save yourself a lot of work and achieved without additional Aufwändungen a uniform joint.The conical geometry of FugiFix® FFZ in the front area, this can hurt without the deck board can be removed. The wide surface prevents pressing the FugiFix spacers in softwood. Uneven joints lead to an impairment of the entire terrace optics and will not be tolerated by builders.

SIHGA GleitFix is a further development of the SIHGA DielenFix.The successor to the DielenFix is a one-part system, which is fastened to the underside of the floor with three screws. The clip connection between the two glass fiber reinforced plastic plates facilitates the alignment of the fastening. Compared to the DielenFix, the system saves a stainless steel drill screw per attachment. SIHGA GleitFix can be used for nearly all types of wood with a width between 90 and 150 mm.Its height has been raised from 6 to 8 mm, which ensures perfect structural protection for the substructure and guarantees an optimal aerated terrace - a key criterion for the service life of terraces.Also new is a special attachment for the initial and end boards. Now these can also be fixed invisibly: GleitFix AE SIHGA DielenFix quantity calculation:To determine the amount required, we recommend the following auxiliary formula:Total linear meters of the substructure / plank width including gapUsing the example of a terrace with a 15 meter substructure, hallway width 144 mm, 6 mm groove:15 / 0.150  = 100 pieces The use: fastened planks not visible screwed; produced, developed and patented in Austria gives elegant appearance and safety of the screw suitable for almost all types of wood reduces errors on site upon delivery of the material; thereby bringing time savings and reduced storage costs Made of SIHGAMID®, the fiberglass-reinforced plastic from the Space Exploration secured more durable than stainless steel, even when säurehältigen woods; is extremely strong, heat, frost and UV-resistant; no material fatigue Floorboards remain intact at all visible surfaces the woods are screwed from below, which gives longer shelf life and prevents putrefaction and the direct influence of weather like swelling and shrinkage of the wood from operations reduces the crack and fracture behavior of wood in these natural processes Choice of three screw lengths Possible use for all common hallway strengths 19-40 mm variable visible joint 0-15 mm, for each suitable builders Height, material thickness 8 mm for optimum aeration and ensures optimum constructive wood protection at GleitFix® GF CS A4 screws are enclosed time-saving, convenient, accurate and matching SIHGAFIX® prevents rust and rust and stainless steel A4 BohrFix® for saltwater and chlorine environment Included SIHGAFIX® stainless, hardened stainless steel BohrFix® with drill bit and installation instructions no rust, no tearing or rupture of the screws; time-saving, convenient, accurate, all accessories accompanies SIHGA® TIP: MAGBIT® facilitates assembly For optimum adaptation to the type of wood of the boards or on the weathering situation of DielenFix® is produced with different fastening screws:Type GleitFix® GF incl. BohrFix® stainless steelType GleitFix® GF CS incl. BohrFix® stainless steel A4

The Osmo stairs care box is ideal for cleaning and refreshing as well as maintaining wooden stairs treated with Osmo Hartwachs-Öl.SET CONTENTS>  Wash and Care cleaning concentrate 250 ml>  Maintenance Oil clear 200 ml>  Easy Pads 2 pcs.>  Polishing pad>  Gloves 1 pair>  Care instructionsPlease follow the work instructions for each individual product.

Easy-to-handle double spring spatula made of flat sheet metal with rounded corners.

The 2.5 litre country house paint Japan red TORII is a real eye-catcher for any entrance area. It shines in a vibrant red colour that even the ghosts can't miss. Inspired by the wooden torii, the traditional entrance gates to religious sites in Japan, this colour marks the boundary between the sacred and the ordinary. The torii are an important part of Shintoism, the original religion of Japan. With their skilfully stacked roofs, they immediately catch the eye and symbolise the belief in the connection between man and nature. In Japan, this particularly striking colour is also known as "Japanese red" and is very popular with tourists for taking photographs. Our colour is produced in Germany and since 2012 it has also been supplying the Shinto shrines in Japan with a special shade. This exact colour was approved by the scholars of Shintoism, because every pagoda should shine in exactly the same auspicious red. ADVANTAGES> The wood structure remains visible> All colours can be mixed with each other> Country Colour is weather-resistant and robust against small damages> Resistant to saliva and perspiration, suitable for children's toys> Can sizes: 2.50 L> 1 litre covers approx. 26 m2 with one coat.

Osmo Garden Stain is a fast-drying, high-quality glaze for outdoor use that has been specially developed to protect wooden surfaces from the effects of the weather while maintaining a beautiful, natural appearance.Intended use: - Wooden facades, balconies, shutters, fences, pergolas, garden sheds, garden furniture, carports (except decking boards) - wherever wood is used outdoors, this glaze offers effective protection. - It is ideal for non-dimensionally stable and dimensionally stable wooden surfaces in outdoor areas that are exposed to all weather conditions.Properties: - Quick-drying: The stain is quickly absorbed into the wood and dries within a short time, which enables rapid processing and use. - Very long service life: Due to its special formulation, the stain offers long-lasting protection that protects the wood over a longer period of time and reduces the need for frequent re-treatment. - Weather-resistant: The glaze protects wood from harmful weather influences such as rain, sun, snow and cold without affecting the natural wood structure.- Breathable and open-pored: The wood can continue to “breathe”, which prevents the development of moisture damage such as mold or rot, while at the same time reducing the penetration of water from the air. - Aesthetic effect: The stain preserves the natural appearance of the wood and highlights the wood grain without covering the material.Application: 1. preparation of the surface: the wood surface must be clean, dry and free of dirt, dust and old coats of paint. If necessary, the wood can be sanded beforehand to achieve better adhesion. 2. application: Apply the stain evenly with a brush, an OSMO microfiber roller or a sprayer. Especially on vertical surfaces such as facades, the glaze should be applied in the direction of the wood grain. 3. drying time: The glaze should dry sufficiently between coats (approx. 3-4 hours, depending on temperature and humidity). 4. repetition: As a rule, two coats are sufficient to achieve optimum protection and an even appearance.YIELD: 1 liter is sufficient for approx. 16 m2 with 1 coat. Container sizes: 0.75 l, 2.50 lConclusion:Osmo Garden Stain offers an excellent long-term solution for the protection of exterior wood. It combines fast drying, long durability and high weather protection, while at the same time preserving the natural beauty of the wood. It is suitable for a wide range of wooden surfaces, from facades to garden furniture, and is an ideal choice when it comes to maintaining and protecting exterior wood.

Rich colours based on natural oil Bring colour to your life. Whether natural or showy - SAICOS Color Wax is indispensable for the design of coloured wall coverings or furniture in indoor areas. Even children's toys can be painted with the colour wax without a second thought.  Benefits For interior wood such as furniture, doors, mouldings, wall and ceiling panelling, children's toys and coloured floors (as a primer)Natural oil baseSemi-matt surfaceOxidative drying Colourful variety for your furniture The natural oils penetrate deep into the wood to protect it from the inside and keep it elastic. Natural waxes ensure high durability and a long-lasting beautiful surface. The paint is moisture-regulating, breathable and easy to clean. All shades can be mixed with each other and thus ensure an extremely wide range of colours. We recommend SAICOS Premium Hardwax-Oil for the final floor coating.

The RELO system accessories enable a simple and quick system construction of terrace substructures.RELO E corner composite angles are used for composite connections of terrace substructure rails, support connections for the ventilation profile and connection points for facing.RELO L longitudinal connectors are used for an endless and offset-free extension of the substructure rails. The longitudinal joints should be carried out directly at the point of support.The corner brackets and longitudinal connectors made of solid aluminum enable precise fitting thanks to automatic centering on the lateral guide slots of the substructure rails.RELO A adapter is used for the screwless positioning of the substructure rail on the LIFTO terrace foot and at the same time enables guidance for the longitudinal joint.RELO R railing is used for the parallel alignment of the substructures and results in an automatic center distance of 450 mm.The hard galvanized metal bars can be shortened if necessary.RELO A and R can be quickly and easily combined using a simple plug connection.

The adjustable X-base plate pedestal of the LIFTO K is sturdy and secure once in position. The height adjustment can be can be extended by simply inserting a adapter increasing the range permitting more flexibility during the installation process. Thanks to the adaptable components LIFTO K also permits the laying of patio tiles made of stone, concrete or ceramics. OverviewHeight range:50 - 80 mm  |  80 - 140 mm.  + AdapterAdapter KA60:+ 60 mm height adjustmentDimensions:LIFTO KU: Baseplate Ø 225 mm ǀ 90 mm support plate diameterLIFTO KS: Support plate Ø 120 mm ǀ Joint cross 3.2 mmMaterial:PP polypropylene Recycled black ǀ UV and weather resistantAccessories:UNIA 4.2 x 22 mm for fastening the pedestals to a wooden or aluminium substructureRELO A adapter for screwless fastening of the pedestals to RELO substructure joistsGUMO LGD/LGA pressure distribution pad for flat roof / LGA for aluminium foilLIFTO N automatic three-dimensional 4 % levelling / installation height + 15 mmLIFTO R regulating disc for stone slabs - thickness 1.2 or 2.0 mm

Regardless of the board geometry this is implemented quickly with the DILA C decking connector. The height of the connector creates an optimal distance between the surface and substructure to prevent the formation of waterlogging. Each package contains the UNIA1 system screws 4.2 x 22 mm and 4.2 x 33 mm required for installation. 1 piece HELPO mounting aid and assembly instructions. Fixing: concealed systemFixing type: sliding and fixed pointJoint distance: selectableDecking board: For domestic and modified wood species 19 - 32 mmBoard replacement: possible when boards joints are over 6,0 mmMaterial: PA6 30 GF black plasticTension arm: Flexible designUNIA drilling capacity: ca. 3 mm thick AluminiumSpecial feature: start and end clip modification

Ideally suited for working comfortably standing or on higher places. High-quality aluminium telescoptic handle.With SoftTouch handle for work safety.Adjustable from 120-200 cm Shipping: Bulky goods surcharge € 10.00

The substantial increase longevity of wooden deckings. Even joints are to be made with the simplest TerrassenFix® II TF.Simultaneously, the 6 mm thick TerrassenFix® II TF ensures optimum constructive wood protection, that is, between decking and substructure is optimally ventilated and prevented waterlogging. Another important advantage is that the screws are not loaded for shearing but to bending through the use of TerrassenFix® II TF.The TerrassenFix® II TFS pin enables the quick adjustment of the joint width during assembly and is then completely removed again - very important so that the decking will not be blocked in their natural swelling and shrinking processes!The TerrassenFix® II TF does not have to be laboriously screwed on the substructure, but is merely placed. The special material increases walking comfort on the terrace!Total offers TerrassenFix® II TF tremendous relief and reduction of working time and a significant extension of the life of terraces.

5 inserts

Easy-to-handle double spring spatula made of flat sheet metal with rounded corners.

Brush ring for intensive cleaning.Perfect for cleaning, care and maintenance, refreshing or renovating oiled surfaces.

The RELO system accessories enable a simple and quick system construction of terrace substructures.RELO E corner composite angles are used for composite connections of terrace substructure rails, support connections for the ventilation profile and connection points for facing.RELO L longitudinal connectors are used for an endless and offset-free extension of the substructure rails. The longitudinal joints should be carried out directly at the point of support.The corner brackets and longitudinal connectors made of solid aluminum enable precise fitting thanks to automatic centering on the lateral guide slots of the substructure rails.RELO A adapter is used for the screwless positioning of the substructure rail on the LIFTO terrace foot and at the same time enables guidance for the longitudinal joint.RELO R railing is used for the parallel alignment of the substructures and results in an automatic center distance of 450 mm.The hard galvanized metal bars can be shortened if necessary.RELO A and R can be quickly and easily combined using a simple plug connection.

The future is solvent-free - our Ecoline Hardwax-Oil 2.0 also Pure nature in your living room – possible with our Ecoline Hardwax-Oil 2.0. Resistable, durable and also environmental gentle? Not feasable? Yes it is! With Ecoline Hardwax-Oil 2.0. The new solvent-free Ecoline Hardwax-Oil 2.0 combines the well-known, high SAICOS quality with the ecological requirements of our time. With its natural ingredients it creates a natural yet also extremely abrasion resistant wooden and cork surface which can be cleaned easily.  Benefits For all wooden and cork floors, tables and worktops as well as other heavily used wooden surfacesSolvent-free, natural, environmentally-friendlyExtremely durableStain-resistantOxidative drying The ecological wood coating for everyone Our wooden floor has to withstand a lot in everyday life. Food leftovers, children's toys, but also dirt and grime put a lot of strain on the expensive wooden and cork flooring. It is therefore particularly important to choose the coating carefully. With the Ecoline Hardwax-Oil 2.0 you combine perfect protection with ecological demands. And the best: It is solvent-free! Based on natural oils and waxes, you get an abrasion-resistant and extremely hard-wearing surface, which is also healthy and breathable. With its slip-resistant surface in accordance with R9, the well-known risk of slipping on wooden floors is reduced. And whoever thinks that such a floor is difficult to clean is wrong! A surface coated with Ecoline Hardwax-Oil 2.0 is dirt-repellent and therefore only needs to be wiped with a damp cloth.If at some point a renovation is necessary, this can be done without laborious sanding of the surface. Green, greener, Ecoline The future is green! Green like our Ecoline series. For years, the ecological footprint has been moving more and more into the consciousness of society. We had recognized this and developed the environmentally friendly Ecoline product line 10 years ago, which includes particularly sustainable products with a low solvent content. To complete the portfolio, the Ecoline series has even been supplemented with a completely solvent-free Hardwax-Oil. Additional Hardener 2K for special requirements For an even stronger surface quality, the additive Hardener 2K can be added to the Ecoline Hardwax-Oil 2.0. In this way, the treated surface becomes resilient and more wear-resistant earlier.The quantities in the tins exactly match the respective can contents of the Ecoline Hardwax-Oil 2.0 (0.75 L and 2.5 L).

fastens wood to wood without pre-drilling and without countersinkingreduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood  also attaches coverings made out of hard and thermo-woodcreates a perfect look, with these woods additional pre-drilling is recommended  multi-stage head with small head diameterhigh constructive wood protection and refined surface as a result of the plane head  special thread angle with sharp thread edgeshigh pull-out value  SIHGA® point with special shapeguarantees fast setting of screws without splitting  SIHGA® ribs on shaft and slip coatinglight, fast rotation and optimum fit in the wood are guaranteed  made from hardened stainless steelrust-free fastening, extremely break-proof  also available with black (SC 9 coating) and antique look (SC 11 coating)optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai  including SIHGAFIX® stainless steel, Systemstift® and installation instructionstime-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves  When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4). L-GoFix® MS A2 made from A2 stainless steelstands out thanks to its good corrosion resistance and is best used in moderate, corrosive environments Because of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials

in the minimontagepack inkl. SIHGAFIX stainless steel TX 20     SIHGA® MEDIATHEK   

The end cover RELO VB ensures a beautiful front end.With the system accessories for RELO V, side panels become the visual highlight of your terrace.Each PU contains the UNIA1 system screws 4.2 x 22 mm required for assembly

For naturally beautiful worktops with a long service life. Suitable for:All types of stressed wooden surfaces such as kitchen countertops, table tops, furniture and much more. benefits> Fast drying (4 - 5 hours) - Complete coating in one day!> High yield - 1 liter is sufficient for 14 m² (3 jobs)> Environmentally friendly> Easy to use> Durable> Water and dirt repellent> Very easy to clean and maintain> Renovation possible without sanding! The optimal protection for permanently hard-wearing wooden surfaces. Worktops have to withstand a lot in everyday life: heat, cold, leftover food, a wide variety of liquids and then also sharp knives. In order to withstand all these stresses and strains, your wooden worktop needs optimal protection: our SAICOS worktop oil. Made from natural ingredients, it creates extremely hard-wearing and natural wooden surfaces with a long shelf life. The elasticity of the wood is retained and it is protected from the inside. SAICOS worktop oil dries within a few hours. Water and dirt repellent, it is the ideal product for long-lasting protection and maintenance of wooden surfaces that are exposed to regular loads. Surfaces in need of renovation can simply be painted over with SAICOS worktop oil without sanding after cleaning. Worktops made from exotic or thermally treated woods require a previous coating with SAICOS Extra Thin Priming Oil. processingSAICOS worktop oil is ready to use. Shake well - do not dilute.1. Apply the first application evenly and thinly with the SAICOS flat brush, the SAICOS oil / wax roller or a lint-free cloth. Note: Do not pour SAICOS worktop oil directly onto the surface, but work with a paint tray.2. Drying time: approx. 4 - 5 hours, depending on the temperature and humidity. Best processing temperature between 8 ° C and 35 ° C. Oxidative drying - ensure that windows are open and air can circulate well during and after processing.3. Intermediate sanding with Scotchpad P280.4. For the second order, see point 1.5. After a reaction time of 5 minutes, remove the excess material with a clean, lint-free cloth.6. Drying time: approx. 4 - 5 hours, see point 2.7. Third order like the first and second order. maintenanceEcoline Wipe Care Concentrate: for regular cleaningEcoline care wax: for refreshing care as requiredThe surfaces should be reworked annually or as required with a thin layer of SAICOS worktop oil to ensure optimal durability.

Prevents direct contact of the substructure to the foundation Since the direct contact of the substructure is a terrace with soil or foundation to be avoided, the JustiFix® J provides indispensable support, especially when only low installation heights for the constructive wood protection exist.Using the J JustiFix® the waterlogging is prohibited under the terrace and ensuring good ventilation.By producing high-quality EDPM special rubber of JustiFix® J remains dimensionally stable even when exposed to heat, frost and UV influences! Simultaneously, the walking comfort is increased by the vibration damping effect!For the easy level adjustment between wood substructure and foundation of JustiFix® J is manufactured in three different material thicknesses.JustiFix® J is simply placed under the substructure and is arbitrarily stackable.

For the prevention of hairline cracks on the front of the wood The wooden edges and cut surfaces of terraces also need to be cared for and protected. If they are not sufficiently coated, moisture will pull into the wood and cause cracks. Benefits Protects front edges and cut surfaces against cracks and moistureFor all terrace woodsStain-resistantHighly water-repellentColourlessWood protection for small areas SAICOS End-Grain Sealing Wax prevents hairline cracks on the front sides and prevents wood components from bleeding. It is dirt- and water-repellent and is suitable for all types of outdoor wood.