Eurotec Drill-Stop
Product number: 945986
EAN: 4250207426868
Product information "Eurotec Drill-Stop"
For decking screws Ø 5 and 5.5 mm
Drilling diameter: 4.7 mm
Drilling depth: 25 mm
Shank diameter: 7 mm
Pre-drilling is highly recommended for fastening tropical woods/hardwoods. This is also advisable for Douglas fir wood, which is relatively easy to split, and when screwing close to the end grain.
- Drilling and countersinking in one operation
- Screw-in torque for setting Terrassotec and Hapatec screws is greatly reduced, i.e. no more tearing off of the screws, especially with hardwood/stainless steel V2A or V4A combinations
- Perfect fit of the screw head
Downloads "Eurotec Drill-Stop"
Skip product gallery 
Similar Items
Tip
SIHGA® Bohrsenker II TFB/ES
The TerrassenFix® countersink TFB / ES II is suitable for all wood terrace. Hole and countersink the TerrassenFix® countersink TFB / ES II are precisely tailored to the hardened stainless steel screws L-GoFix® MS and L-BohrFix® MB 5 mm in diameter. The integrated depth stop ensures a uniform design of the reduction. An important detail in building terraces as caused by too deep cuts moisture nests. Drills and countersinks are made of hardened stainless steel to avoid at any nascent "abrasion" extraneous rust. Drills and countersinks have a special geometry for optimum removal of chips and the cylindrical shaft fits into every chuck.Tool System Package: protects the contents from contamination and damage stable and resistant to moisture and oil Locking mechanism for secure closure Square end secure against rolling transparent to identify the contents recyclable polypropylene
From €53.64*
HELPO countersink
The heavy duty pre-drill and countersink tool does it all in one motionenabling a fast, easy and clean screw hole for the perfect screwhead finish. For: ELITA 5,0 mmSOLIDA 5,0 mmSOLIDA 5,5 mm PROFILA 5,5 mm
€25.50*
Skip product gallery
Similar Items
HELPO countersink
The heavy duty pre-drill and countersink tool does it all in one motionenabling a fast, easy and clean screw hole for the perfect screwhead finish. For: ELITA 5,0 mmSOLIDA 5,0 mmSOLIDA 5,5 mm PROFILA 5,5 mm
€25.50*
Tip
SIHGA® Bohrsenker II TFB/ES
The TerrassenFix® countersink TFB / ES II is suitable for all wood terrace. Hole and countersink the TerrassenFix® countersink TFB / ES II are precisely tailored to the hardened stainless steel screws L-GoFix® MS and L-BohrFix® MB 5 mm in diameter. The integrated depth stop ensures a uniform design of the reduction. An important detail in building terraces as caused by too deep cuts moisture nests. Drills and countersinks are made of hardened stainless steel to avoid at any nascent "abrasion" extraneous rust. Drills and countersinks have a special geometry for optimum removal of chips and the cylindrical shaft fits into every chuck.Tool System Package: protects the contents from contamination and damage stable and resistant to moisture and oil Locking mechanism for secure closure Square end secure against rolling transparent to identify the contents recyclable polypropylene
From €53.64*