HELPO countersink

For decking screws Ø 5 and 5.5 mmDrilling diameter: 4.7 mmDrilling depth: 25 mmShank diameter: 7 mmPre-drilling is highly recommended for fastening tropical woods/hardwoods. This is also advisable for Douglas fir wood, which is relatively easy to split, and when screwing close to the end grain.- Drilling and countersinking in one operation- Screw-in torque for setting Terrassotec and Hapatec screws is greatly reduced, i.e. no more tearing off of the screws, especially with hardwood/stainless steel V2A or V4A combinations- Perfect fit of the screw head

The TerrassenFix® countersink TFB / ES II is suitable for all wood terrace. Hole and countersink the TerrassenFix® countersink TFB / ES II are precisely tailored to the hardened stainless steel screws L-GoFix® MS and L-BohrFix® MB 5 mm in diameter. The integrated depth stop ensures a uniform design of the reduction. An important detail in building terraces as caused by too deep cuts moisture nests. Drills and countersinks are made of hardened stainless steel to avoid at any nascent "abrasion" extraneous rust. Drills and countersinks have a special geometry for optimum removal of chips and the cylindrical shaft fits into every chuck.Tool System Package: protects the contents from contamination and damage stable and resistant to moisture and oil Locking mechanism for secure closure Square end secure against rolling transparent to identify the contents recyclable polypropylene

Developed for solid grip and precise positioning. Installation process with minimum effort and maximum resistance. Elegant appearance, integrated pre-drilling point, rapid penetration, flush head finish and versatile for outdoor purposes. Length: 25 - 120 mmDiameter: 3,2 - 6 mmHead: 3-Step-Head 

PROFILED SELF-TAPPING SCREW Designed to efficiently drill through metal. High breaking strength and the special geometry gives this screw the properties to achieve a perfect fit. Length: 35 - 70 mmDiameter: 5,5 mmHead: 3-Step-Head

The ELITA stainless steel screws are specifically designed to securely mount wood or wood-likeTerrace and facade boards in demanding exterior applications where visual quality is paramount.The geometry of the countersunk screw head has 3 steps which permit a perfect precise flush finish. ELITA can be additionally combined with PROFILA and SOLIDA screws due to the identical diameter of the screw heads allowing a uniform screw head arrangement.Length: 50 - 80 mmDiameter: 4.5 mm, 5.0 mmHead: 3-Step-HeadBit: TXMaterial: Hardened stainless steel

For decking screws Ø 5 and 5.5 mmDrilling diameter: 4.7 mmDrilling depth: 25 mmShank diameter: 7 mmPre-drilling is highly recommended for fastening tropical woods/hardwoods. This is also advisable for Douglas fir wood, which is relatively easy to split, and when screwing close to the end grain.- Drilling and countersinking in one operation- Screw-in torque for setting Terrassotec and Hapatec screws is greatly reduced, i.e. no more tearing off of the screws, especially with hardwood/stainless steel V2A or V4A combinations- Perfect fit of the screw head

The TerrassenFix® countersink TFB / ES II is suitable for all wood terrace. Hole and countersink the TerrassenFix® countersink TFB / ES II are precisely tailored to the hardened stainless steel screws L-GoFix® MS and L-BohrFix® MB 5 mm in diameter. The integrated depth stop ensures a uniform design of the reduction. An important detail in building terraces as caused by too deep cuts moisture nests. Drills and countersinks are made of hardened stainless steel to avoid at any nascent "abrasion" extraneous rust. Drills and countersinks have a special geometry for optimum removal of chips and the cylindrical shaft fits into every chuck.Tool System Package: protects the contents from contamination and damage stable and resistant to moisture and oil Locking mechanism for secure closure Square end secure against rolling transparent to identify the contents recyclable polypropylene