ELITA STAINLESS STEEL SCREW

Developed for solid grip and precise positioning. Installation process with minimum effort and maximum resistance. Elegant appearance, integrated pre-drilling point, rapid penetration, flush head finish and versatile for outdoor purposes. Length: 25 - 120 mmDiameter: 3,2 - 6 mmHead: 3-Step-Head 

SIHGA® TIPIn case of applications in the pool area with timbers and with a high tannin content, we recommend using L-BohrFix® MB A4. For surface-flush rotation, fast and secure, we recommend TerrassenFix® Depth Limiter TTB. fastens wood to wood without pre-drilling and without countersinkingreduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood also attaches coverings made out of hard and thermo-woodcreates a perfect look, with these woods additional pre-drilling is recommended multi-stage head with small head diameterhigh constructive wood protection and refined surface as a result of the plane head special thread angle with sharp thread edgeshigh pull-out value SIHGA® point with special shapeguarantees fast setting of screws without splitting SIHGA® ribs on shaft and slip coatinglight, fast rotation and optimum fit in the wood are guaranteed made from hardened stainless steelrust-free fastening, extremely break-proof also available with black (SC 9 coating) and antique look (SC 11 coating)optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai including SIHGAFIX® stainless steel, Systemstift® and installation instructionstime-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4).L-GoFix® MS A2 made from A2 stainless steelstands out thanks to its good corrosion resistance and is best used in moderate, corrosive environmentsBecause of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials

The new Sihga® TeFix® screw can be screwed on cleanly on patios and facades without pre-drilling and countersinking.BENEFITS> fastens wood to wood without pre-drilling and countersinking> prevents cracking or splitting of the woods in almost all hardwoods and thermo-woods> Made from hardened, rustproof stainless steel> fastens rustproof and is extremely unbreakable> SIHGA® friction shaft with a special shape> pre-drill the board with 5 mm; the wood can swell and shrink> SIHGA® multi-stage head further developed> thanks to the extra thin head and sawtooth ribs, no displacement or chipping of the wood> in combination with KompeFix® II KF the perfect solution> increases the lifespan of the wood and the screw> including TEBIT® rustproof with holding function, Systemstift® and assembly instructionstime-saving, practical, precise, all accessories are included; TEBIT® rust-free holds the screw without a magnet and prevents extraneous rust

The heavy duty pre-drill and countersink tool does it all in one motionenabling a fast, easy and clean screw hole for the perfect screwhead finish. For: ELITA 5,0 mmSOLIDA 5,0 mmSOLIDA 5,5 mm PROFILA 5,5 mm  

The bit holder fits directly into any drill chuck or impact screwdriver and can therefore be used without additional adapters.A bit length of 50 mm ensures easy handling.Different bit sizes can be easily differentiated by color coding.

The small aid for precise board spacing and exact pre-drillingIt has never been so easy to achieve such a visually pleasing result with the least effort.
Application: board spacing and drilling jigboard space: 5, 6, 7, 8 mmborder distance: 15, 20, 25 mm

Each HELPO set contains 1 PC HELPO countersink, 2 PC HELPO assembly aids and 1 PC HELPO bit TX25 black 50 mm. The small aid for precise board spacing and exact pre-drillingIt has never been so easy to achieve such a visually pleasing result with the least effort.
Application: board spacing and drilling jigboard space: 5, 6, 7, 8 mmborder distance: 15, 20, 25 mm

The bit holder fits directly into any drill chuck or impact screwdriver and can therefore be used without additional adapters.A bit length of 75 mm ensures easy handling.

BASO is a spacer for ventilation and prevents waterlogging between the decking and the substructure. The integrated glass fiber reinforced spring elements contribute to a secure connection, prevent noise generation and increase walking comfort. Overview Dimensions:Length 80 mm | Width 25 mm | Height 6 mmJoint spacer 4 mmJoint spacer 7 mmMaterial:PP Polypropylene Recycled blackUV and weather resistantFastening type:Distance spacer for visible screw connections

Developed for solid grip and precise positioning. Installation process with minimum effort and maximum resistance. Elegant appearance, integrated pre-drilling point, rapid penetration, flush head finish and versatile for outdoor purposes. Length: 25 - 120 mmDiameter: 3,2 - 6 mmHead: 3-Step-Head 

SIHGA® TIPIn case of applications in the pool area with timbers and with a high tannin content, we recommend using L-BohrFix® MB A4. For surface-flush rotation, fast and secure, we recommend TerrassenFix® Depth Limiter TTB. fastens wood to wood without pre-drilling and without countersinkingreduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood also attaches coverings made out of hard and thermo-woodcreates a perfect look, with these woods additional pre-drilling is recommended multi-stage head with small head diameterhigh constructive wood protection and refined surface as a result of the plane head special thread angle with sharp thread edgeshigh pull-out value SIHGA® point with special shapeguarantees fast setting of screws without splitting SIHGA® ribs on shaft and slip coatinglight, fast rotation and optimum fit in the wood are guaranteed made from hardened stainless steelrust-free fastening, extremely break-proof also available with black (SC 9 coating) and antique look (SC 11 coating)optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai including SIHGAFIX® stainless steel, Systemstift® and installation instructionstime-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4).L-GoFix® MS A2 made from A2 stainless steelstands out thanks to its good corrosion resistance and is best used in moderate, corrosive environmentsBecause of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials

The new Sihga® TeFix® screw can be screwed on cleanly on patios and facades without pre-drilling and countersinking.BENEFITS> fastens wood to wood without pre-drilling and countersinking> prevents cracking or splitting of the woods in almost all hardwoods and thermo-woods> Made from hardened, rustproof stainless steel> fastens rustproof and is extremely unbreakable> SIHGA® friction shaft with a special shape> pre-drill the board with 5 mm; the wood can swell and shrink> SIHGA® multi-stage head further developed> thanks to the extra thin head and sawtooth ribs, no displacement or chipping of the wood> in combination with KompeFix® II KF the perfect solution> increases the lifespan of the wood and the screw> including TEBIT® rustproof with holding function, Systemstift® and assembly instructionstime-saving, practical, precise, all accessories are included; TEBIT® rust-free holds the screw without a magnet and prevents extraneous rust