TerrassenFix® depth limiter TTB

The TerrassenFix® countersink TFB / ES II is suitable for all wood terrace. Hole and countersink the TerrassenFix® countersink TFB / ES II are precisely tailored to the hardened stainless steel screws L-GoFix® MS and L-BohrFix® MB 5 mm in diameter. The integrated depth stop ensures a uniform design of the reduction. An important detail in building terraces as caused by too deep cuts moisture nests. Drills and countersinks are made of hardened stainless steel to avoid at any nascent "abrasion" extraneous rust. Drills and countersinks have a special geometry for optimum removal of chips and the cylindrical shaft fits into every chuck.Tool System Package: protects the contents from contamination and damage stable and resistant to moisture and oil Locking mechanism for secure closure Square end secure against rolling transparent to identify the contents recyclable polypropylene

The problem solver for terrace The TerrassenFix® ferrule II TFZ enables efficient work and is extremely easy to deploy.For coarse adjustment of span of the front part is simply pushed to the desired position, the fixing is carried out using a magnetic pen. The fine adjustment, the clamping together of planks and loosening the clamp is done by turning the handle.The TerrassenFix® ferrule II TFZ is of course universally for other applications.

The substantial increase longevity of wooden deckings. Even joints are to be made with the simplest TerrassenFix® II TF.Simultaneously, the 6 mm thick TerrassenFix® II TF ensures optimum constructive wood protection, that is, between decking and substructure is optimally ventilated and prevented waterlogging. Another important advantage is that the screws are not loaded for shearing but to bending through the use of TerrassenFix® II TF.The TerrassenFix® II TFS pin enables the quick adjustment of the joint width during assembly and is then completely removed again - very important so that the decking will not be blocked in their natural swelling and shrinking processes!The TerrassenFix® II TF does not have to be laboriously screwed on the substructure, but is merely placed. The special material increases walking comfort on the terrace!Total offers TerrassenFix® II TF tremendous relief and reduction of working time and a significant extension of the life of terraces.

Stainless steel MOUNTS EXTERIOR WOOD PROFESSIONAL AND PERMANENTLY In mounting pack or object pack incl. assembly instructions, pencil S1 and SIHGAFIX stainless steel.The protected L-GoFix® MS multistage head combines high pullout force with a very small head diameter.The plane head conclusion gives the area a clean, elegant appearance, thereby increasing the constructive wood protection. For softer woods such as Larch, Douglas fir, pine, is the L-GoFix® MS to blow up without pre-drilling, with no pre-sinking and without the wood, simple and clean screwed from above! For harder woods such as Tropical woods or thermo-modified wood should be pre-drilled with the TerrassenFix® countersink TFB / ES II.The special SIHGA® tip guarantees very quickly attached. The integrated milling splines on the shaft and the sliding coating ensure easy screwing. Sharp thread flanks provide optimum seating in wood. These features enable universal use, even in OSB the L-GoFix® MS optimal screw to. SIHGA® Tip: For optimum constructive wood protection and to reduce the shear on screws (by the swelling / shrinking behavior of the timbers), we recommend the use of TerrassenFix® II TF or KompeFix® II KF.

With the TerrassenFix® template TFS is without complicated measuring and marking, the deck board pre-drilled and pre-cuts in one operation.The TerrassenFix® template TFS is the ideal accessory for TerrassenFix® countersink TFB / ES II.The result is an accurate and uniform. Your benefits: Drilling and sinking of the decking without measuring and marking. saves 50% of working and produces attractive, evenly screwed surface. produced in Austria, developed and patented. domestic quality, the experience of over 13 years of terraces has been incorporated. universally 205 mm width in terrace construction - for decking from 70th made entirely of anodized aluminum. for a long service life of the mask in everyday construction. automatically matching lead TerrassenFix® countersink. each hole is performed accurately positioned and evenly. adjustable side wood distance above the stop, either 15, 20, 35 mm. Side timber spacing are easily selectable. constructive wood protection is respected. for rational, fast operation. View port to previous fittings. reliable, externally monitored values provide security in processing and closing quality fluctuations.

SIHGA® TIPIn case of applications in the pool area with timbers and with a high tannin content, we recommend using L-BohrFix® MB A4. For surface-flush rotation, fast and secure, we recommend TerrassenFix® Depth Limiter TTB. fastens wood to wood without pre-drilling and without countersinkingreduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood also attaches coverings made out of hard and thermo-woodcreates a perfect look, with these woods additional pre-drilling is recommended multi-stage head with small head diameterhigh constructive wood protection and refined surface as a result of the plane head special thread angle with sharp thread edgeshigh pull-out value SIHGA® point with special shapeguarantees fast setting of screws without splitting SIHGA® ribs on shaft and slip coatinglight, fast rotation and optimum fit in the wood are guaranteed made from hardened stainless steelrust-free fastening, extremely break-proof also available with black (SC 9 coating) and antique look (SC 11 coating)optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai including SIHGAFIX® stainless steel, Systemstift® and installation instructionstime-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4).L-GoFix® MS A2 made from A2 stainless steelstands out thanks to its good corrosion resistance and is best used in moderate, corrosive environmentsBecause of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials