Geared towards needs of extractive-rich hardwood species – for a low-maintenance surface!Clear, satin, for interior useHighly recommended for extractive-rich woods, such as Merbau, Wenge, Jatoba etc.Particularly deep-penetrating, retains the natural character of the wood. The surface is fully protected, becomes water-repellent and stays breathable.Number of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 l1 litre covers approx. 24 m2 with 1 coat.

Perfect application the easy way! Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods.Available in the following widths: 220 and 400 mm.

Osmo-grain wax protects your decking from cracking and minimize the swelling and shrinkage behavior. Grain-growth effect from the inside and prevent the bleeding of ingredients. The water-free, silicone-free grain-growth is easy to handle and has a high resistance to weathering.Coverage:375 ml sufficient for about 250 decking with bilateral treatment

Extremely durable, opaque exterior finish! Öl-Farbe is best suited for all exterior wood for which an especially durable, biocidal and non-drip coating is desired: timber cladding, roof overhangs, gables, balconies, windows, window shutters, fencing, pergolas, wood shingles, garden sheds, carports and other dimensionally stable and instable constructional elements. Also ideal for renewing old microporous coatings and weathered wood surfaces.ADVANTAGES>  2 coats in one day>  Biocidal coating>  Non-drip and non-splatter>  Fast daying>  High solids content>  Minimizes the risk of visible knots >  1 litre covers approx. 20 m² with one coat.APPLICATIONFinished surface in 1 day, 2 coatsFirst coat on raw wood approx. 45 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 6-8 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.Second coat approx. 45 ml/m². (For renovation works, normally one coat on a cleaned surface is sufficient.)Drying time approx. 12 hours.

Ideal protection against dirt and stains!OSMO POLYMER COMPOSITE MAINTENANCE OIL 030 is a clear product suitable to maintain and restore weathered Wood Polymer Composites (WPC) and Bamboo Polymer Composites (BPC). Especially suited for decking, privacy screens and garden furniture made of WPC or BPC.ADVANTAGES>  Based on natural oils >  Microporous surface>  Stain protections and highly water repellent >  Safe for humans, animals and plants>  Can sizes: 0.75 l; 2.5 l>  1 litre covers approx. 40 m² with one coat.APPLICATIONBefore applying, clean the whole surface with water and Osmo WPC & BPC Reiniger and allow the surface to dry.Apply very thinly with Osmo Flat Brush or Osmo Decking Brush and spread well.Remove excess material with a clean and dry Decking Brush.Drying time approx. 8-10 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.

Nonbiocidal wax impregnation - perfect for use in wet rooms!Clear, for interior and exterior useHighly recommended for use in wet rooms, such as bathrooms and kitchens, as well as outdoor sandboxes and playground equipmentExtremely water-repellent, contains no organic biocidesNumber of coats: 1 coat is sufficient, a top coat with a product from the Osmo range must be carried out within 1 week of application.Can sizes: 0.75 l; 2.50 l1 litre covers approx. 8.4 m² with 1 coat.

Versatile and effective!Pad Holder with joint 95 x 230 mm, for Superpads 120 x 250 mmSuitable for the application of base coats on wooden flooring and the intensive cleaning of wooden flooring and timber decking.Ideal for corners and edges not easily reached with a machine.Superpads in white, red and green, and Oil Finish Applicator Fleece are available as accessories.Suitable for Osmo System Telescopic Handle.

Ideal for protecting against dirt from open-pored stone and terracotta surfaces.Osmo stone and terracotta oil is suitable for the colorless impregnation of open-pore natural stone with a polished, polished to rough-rough surface and concrete stones in the outdoor area. Particularly suitable for sidewalk slabs and window sills made of granite, limestone and slate.BENEFITS> Unique oil-wax combination> Open-pore surface> Protection against dirt and abrasion> resistant to wine, cola, beer (according to DIN 68861-1A)> Strongly water-repellent> Container sizes: 0.75 l; 2.5 l;> 1 liter is sufficient for one coat for approx. 32 m2. The range of the product depends very much on the absorbency of the surface and it can lead to significant deviations in the range.

Intensive care product for wooden flooring treated with Hartwachs-Öl – ideal for commercial interiors! Pflege-Öl is for the general care and maintenance of oiled wooden flooring. Dull or matt surfaces can be freshened with Maintenance Oil. The timely use of Maintenance Oil can prevent time consuming sanding or renovation work.ADVANTAGES >  Ideal for commerical interiors>  Regular maintenance without sanding>  Fast drying>  An integrated component in Osmo wood care>  product range>  Can sizes: 1.00 L; 2.50 L>  1 litre covers approx. 40-60 m²APPLICATIONFinished surface in 1 day, 1 coatWith a Double Blade Scraper or Osmo Microfibre Roller, apply to the surface thinly.Buff into the surface with a single disc machine, e.g. Osmo FloorXcenter, and white pad (except for 3098). Remove excess.Drying time approx. 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.Pflege-Öl can also be applied to smaller areas with a lint-free cloth.

Effective cleaner for WPC / BPC decking and all other wood-plastic-composites.Highly effective, slightly alkaline special cleaner for removing organic and inorganic contaminants in the exterior.Ideal for intensive cleaning of WPC / BPC decking and all other wood-plastic composites (e.g. garden furniture, fencing) in the exterior.Application: Dilute concentrate in mix ratio 1:10 to 1:20 with water. Apply on the contaminanted surfaces, remove the dirt with a scrubbing brush and then rinse with clear water. Test the surface on compatibility in each case!Available in 1, 5 and 10 litre.1 Litre covers approx. 10 - 50 m2

Meets the needs of modern architecture – the innovative long-term protection in three attractive silver metallic colour tones! Transparent, satin, for the exteriorHighly recommended for timber cladding, carports, balcony elements, screens and fences etc.Natural Oil Woodstain Effect is water-repellent and extremely weatherproof and UV-stable. The microporous surface also contains active ingredients to protect the wood against mould, algae and fungal attack.Number of coats: 2 coats on raw wood. For renovation, generally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Innovative Osmo finishing system – ideal for coating or renovating interior wood panelling! Transparent or opaque, satin, for the interiorHighly recommended for furniture and children's toys, walls, ceilings, doors, beams and edge-glued panelsInterior Wax is resistant to dirt, water and abrasion, and smoothens the surface.Fast drying – 2 coats in one dayNumber of coats: 2 coats on raw wood. For renovation, normally 1 coat applied to a clean and dry surface is sufficient – no sanding required!Can sizes: 0.75 l; 2.50 lPlease note: the desired results of the colour tone may vary depending on the wood species.

Twice as much coverage thanks to high oil content – this saves time and money! Transparent, satin, for the exteriorHighly recommended for exterior timber cladding, balcony elements, roof soffits, summer houses, screens, fences etc.Osmo One Coat Only HS Plus smoothens the wood surface and does not crack, flake, peel or blister. The finish is durable, weatherproof and UV-stable, regulates moisture and reduces swelling and shrinkage.Number of coats: 1 coat is sufficient!Can sizes: 0.75 L; 2.50 LNote: Light, transparent colour tones only offer minimal UV protection and are therefore not recommended for surfaces exposed to strong sunlight.Please note: the desired results of the colour tone may vary depending on the wood species.

For wood and metal!OSMO Paint Stripper dissolves and removes synthetic resin lacquers, 1-component lacquers, dispersion and latex paints, oil finishes and wood stains, dispersion glues, polymer plasters etc. on solvent-resistant substrates (wood, metal, mineral substrates, such as render, concrete or stone). It has a mild odour and therefore it can be used on large areas in both indoor and outdoor areas.ADVANTAGES > Powerful paint remover for the interior and exterior> Dissolves and removes synthetic resin varnishes and lacquers, oil coatings and dispersion paints> Can sizes: 1.0 L> 1 litre covers approx. 2-4 m² with one application.

Especially developed for windows and doors – extremely water-repellent, weatherproof and UV-stable!Opaque, satin, for the exterior.Highly recommended for windows and doors.Osmo Opaque Gloss Wood Stain is water-repellent, weatherproof and UV-stable. The finish is easy to apply and offers great coverage.Number of coats: Two coats on raw wood. For renovation generally one coat applied thinly to the clean and dry surface is sufficient - no sanding required!Can sizes: 0.75 L; 2.50 L1 litre covers approx. 20 m2, with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

Removes old Decking-Oils and wood stains uniformly and effectively PRODUCT DESCRIPTION
Ready-to-use, viscous paint remover especially developed for removing old existing oil surface finishes in outdoor areas. Afterwards the surface can be degreyed with Osmo Wood Reviver Power-Gel and then re-oiled.RECOMMENDED USE
Osmo Paint Remover Gel removes old Decking-Oils and wood stains on timber decking and garden furniture made of wood. Ideal for removing oil-based surface finishes on partially weathered timber decking so that an overall oil-free wood surface is achieved.INGREDIENTS
Osmo Paint Remover Gel contains Aqua, Xanthan Gum, Sodium Hydroxide, Potassium Hydroxide. Detailed declaration of ingredients available upon request. TECHNICAL DATA
Specific weight: (density): 1.05 g/cm3 +/- 0.05 g/cm3 pH value: 11.0-11.5STORAGE
Up to 2 years and longer if kept dry, closed tightly and stored in the original container. Do not expose to frost or temperatures over 30 °C!SURFACE PREPARATION
Before the application, remove any debris from the surface with a broom or hand broom.
Cover all areas that should not be treated.
Osmo Paint Remover Gel is ready to use. Do not thin. Stir well before and during use as some separation in product may occur after some time.
Before treatment with Osmo Paint Remover Gel, test the subsurface. A trial application is absolutely.APPLICATION necessary! Suitability, reaction time and required application amount can be determined on representative trial area. Caution should be taken when used on veneers! Veneers may loosen from substrate.METHODS OF APPLICATION
With a brush or Osmo Decking Cleaning Brush, apply product thick enough (approx. 200 ml/m2) on the dry surface to be cleaned, and allow to react for 60 minutes (but not longer than needed!).
Keep surface damp during reaction time (e.g. with a spray bottle). Afterwards scrub the surface with a lot of clear water along the wood grain. After drying, inspect the wood surface and repeat the process if necessary. Residues from Paint Remover Gel can have a negative influence on the drying and adhesive properties of subsequent coatings.
Therefore, it is absolutely essential to thoroughly rinse the surface after treatment. If the wood surface should be re-oiled, the surface must be neutralized and degreyed with Osmo Wood Reviver Power-Gel after drying.CLEANING OF TOOLS
Immediately after use, with soap and water.DRYING TIME
Allow to dry for at least 48 hours (normal climatic conditions, 23 °C/50 % rel. humidity) before applying a new surface finish. Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.COVERAGE
1 litre covers approx. 5 m2 with one application.NOTE
Cover all areas that should not be treated, such as sensitive plants, porous substrates (e.g. lightly coloured pebble dashed concrete, render etc.), aluminium, zinc or lacquered surfaces. Have mop water ready to rinse any surfaces (e.g. aluminium, zinc or lacquered areas) that have accidentally come into contact with the gel. Please wear safety gloves and goggles.

Hard-wearing surface protection for wooden flooring and furniture! Hartwachs-Öl Express is a professional, fast drying finish for wooden flooring, furniture and other high traffic surfaces. Its unique oil-wax combination provides optimal surface protection.ADVANTAGES FOR PROFESSIONALS>  Fast drying>  Suitable for commercial interiors>  No primer, no sanding between coats>  Recoatable after approx. 4-5 hours>  Can sizes: 0.75 L; 2.50 L>  1 litre covers approx. 24 m²ADVANTAGES FOR YOUR CUSTOMERS>  Based on natural, vegetable oils and waxes>  Chemical resistance to water, red wine, cola according to German DIN 68861-1A>  Safe for humans, animals and plants when dry>  Easy cleaning and maintenanceAPPLICATIONFinished surface in 1 day, 2 coatsFirst coat on the raw, sanded wood approx. 35 ml/m².Mistakes in the wet coating can be corrected up to 15 minutes after the first application.Drying time approx. 4 - 5 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a scouring pad before applying the second coat.Second coat approx. 35 ml/m².Drying time approx. 4 - 5 hours

OSMO NCS Landhausfarbe is a better alternative to conventional, sealing paint coats.OSMO NCS Landhausfarbe provides colourful variety combined with the best protection. It is ideal for wooden facades, balconies, windows, garden and holiday homes as well as garden furniture.Special covering wood paint based on natural oil that bonds permanently with the wood. The silky matt surface covers the wood tone and grain, but allows the structure of the wood to be recognised.The paint penetrates deep into the fibres and allows the wood to breathe. It therefore remains permanently elastic, does not crack, flake or peel. In addition, OSMO NCS Country House Colour is robust against minor damage, durable and weather-resistant. Weathered glazes can simply be painted over without sanding and the structure of the wood is retained. OSMO NCS country house paints are mixed to order in the paint factory and can be delivered in approx. 15-30 working days. The minimum order quantity is only 1 x 2.5 litres per colour. Metallic, luminous and effect colours are not available. Please note that the mixed colours are approximate. 1 litre is sufficient for approx. 16 m² with 2 coats. OSMO NCS Country House Colour is a custom-made product that cannot be returned.When ordering, please enter the corresponding NCS colour number in the comments field at the end of the order process!!

120 x 95 x 11 mm Suitable for wet and dry grinding Grit is coated with silicon carbide Adapts perfectly to all contours The sanding mats are coated with aluminium oxide on two sides and are made of pressure-distributed foam, which ensures perfect adaptation to the workpieces. Both dry and wet sanding is possible. APPLICATION: These mats are suitable for processing paint, filler and varnish. Sanding substrates, surfaces and profiles, wood sanding of lacquers, sanding of paint defects or even fine sanding of wood is no problem with the sanding mats.

For optimal application of Decking Oil and Osmo Hardwax-Oil.

White pad for removing especially tough stains, also ideal for light sanding between coats. Perfect for cleaning, care and maintenance, refreshing or renovating oiled surfaces.

For filling small joints!OSMO WOOD PUTTY is a clear polymer dispersion for filling cracks and joints in sanded wooden flooring or parquet. Extremely high filling strength, short drying times and good sanding properties create a quality product. Fugenkittlösung is combined with sanding dust, and thus it offers a big advantage in that it matches the colour of subsurface exactly.ADVANTAGES >  High filling power>  Quick drying>  Good sanding properties>  Low odour>  Sizes: 1.00 L; 5.00 L>  1 litre covers approx. 10-15 m².APPLICATIONBefore applying, stir well in a bucket so that any settlement is mixed in.Mix in sanding dust, best from the same type of wood with a grit 80-120, into thick paste (approx. 15 % weight increase by adding sanding dust).Fill in flooring diagonally with a stainless steel double blade scraper and at the same time press wood putty firmly into joints. Repeat process if necessary.After 30 – 60 minutes the dried paste can be sanded coarsely (grit P80) and afterwards finely sanded (grit P100 – 120) so that no wood putty is left on the surface of the parquet. In most cases, fine sanding with P100 – 120 is enough.Treatment with any oil-and-wax-based wood finish from Osmo can be carried out afterwards.Note: As wood putty mixture and application strongly depends on wood species and sanding dust, a trial application is absolutely necessary! Do not fill joints in sprung or plank flooring!

Microfibre pad for removing dirt and moisture from the floor whilst cleaningPerfect for cleaning, care and maintenance, refreshing or renovating oiled surfaces, also suited for coloured primers

For optimal application of Osmo Hardwax-Oil.