OSMO TopOil 0.5l

Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

For naturally beautiful worktops with a long service life. Suitable for:All types of stressed wooden surfaces such as kitchen countertops, table tops, furniture and much more. benefits> Fast drying (4 - 5 hours) - Complete coating in one day!> High yield - 1 liter is sufficient for 14 m² (3 jobs)> Environmentally friendly> Easy to use> Durable> Water and dirt repellent> Very easy to clean and maintain> Renovation possible without sanding! The optimal protection for permanently hard-wearing wooden surfaces. Worktops have to withstand a lot in everyday life: heat, cold, leftover food, a wide variety of liquids and then also sharp knives. In order to withstand all these stresses and strains, your wooden worktop needs optimal protection: our SAICOS worktop oil. Made from natural ingredients, it creates extremely hard-wearing and natural wooden surfaces with a long shelf life. The elasticity of the wood is retained and it is protected from the inside. SAICOS worktop oil dries within a few hours. Water and dirt repellent, it is the ideal product for long-lasting protection and maintenance of wooden surfaces that are exposed to regular loads. Surfaces in need of renovation can simply be painted over with SAICOS worktop oil without sanding after cleaning. Worktops made from exotic or thermally treated woods require a previous coating with SAICOS Extra Thin Priming Oil. processingSAICOS worktop oil is ready to use. Shake well - do not dilute.1. Apply the first application evenly and thinly with the SAICOS flat brush, the SAICOS oil / wax roller or a lint-free cloth. Note: Do not pour SAICOS worktop oil directly onto the surface, but work with a paint tray.2. Drying time: approx. 4 - 5 hours, depending on the temperature and humidity. Best processing temperature between 8 ° C and 35 ° C. Oxidative drying - ensure that windows are open and air can circulate well during and after processing.3. Intermediate sanding with Scotchpad P280.4. For the second order, see point 1.5. After a reaction time of 5 minutes, remove the excess material with a clean, lint-free cloth.6. Drying time: approx. 4 - 5 hours, see point 2.7. Third order like the first and second order. maintenanceEcoline Wipe Care Concentrate: for regular cleaningEcoline care wax: for refreshing care as requiredThe surfaces should be reworked annually or as required with a thin layer of SAICOS worktop oil to ensure optimal durability.

The OSMO surface brush is a high-quality brush that has been specially developed for use with OSMO wood care products. With its wide, flat shape, it is perfect for applying oils, waxes and varnishes to larger surfaces such as floors, furniture or patios. The brush is made of high-quality materials and is particularly durable, so that it offers consistently high quality even with regular use. Thanks to its ergonomic shape, it sits comfortably in the hand and enables precise and even application of OSMO products. The OSMO Surface Brush is an indispensable tool for anyone who wants to optimally maintain and protect their wooden surfaces.

Optimally equipped for any painting projectFor the optimal application of all oil based wood finishes    •    Ideal for treating larger areas made of rough sawn, untreated or planed wood.    •    Ergonomically shaped for fatigue-free work    •    Optimal product absorption and and even distribution provide very good finishing results.    •    Contents: roller tray with ridged area, disposable tray inserts (3 pieces), Microfibre Roller (100 mm wide) and roller frame and Flat Brush (60 mm)    •    Suitable for Osmo System Telescopic Handle

Cleans brushes, quickly and easily.For cleaning of painting utensils after applying Osmo Wood Finishes or other solvent-based oil or acrylic paints.Can also be used as thinner for solvent based paints.

One set for all eventualities – fully equipped for the treatment of worktops and furniture made of wood.Initial care, maintenance and refreshing in one set: TopOil clear matt 500 ml Spray Cleaner 500 ml Hand Pad Holder Oil Finish Applicator Fleece Buffing fleece Care instructions

Specifically geared towards the needs of wooden flooring – for a low-maintenance surface that provides a healthy atmosphere! Colourless, for interior use.Particularly recommended for solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring; also suitable for furniture surfaces and laminated wood.Hardwax Oil Original enhances the colour intensity of the wood surface, is tread-resistant, water and dirt-repellent, durable and extremely hard-wearing.Number of coats: Two coats on untreated wood, in the case of renovation, one coat on the cleaned surface is usually sufficient - without sanding!PRODUCT DESCRIPTION
Colourless, glossy to matt wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch.Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish.Simple application - without primer and intermediate sanding - saves time and money.
Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains.The dried coating is harmless to humans, animals and plants (saliva and perspiration resistant according to DIN 53160, suitable for children's toys according to EN 71.3).AREAS OF APPLICATION
Osmo Hartwachs-Öl Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship flooring, OSB and cork flooring as well as for furniture surfaces.INGREDIENTS
Based on natural vegetable oils and waxes (sunflower oil, soya oil, safflower oil, carnauba and candelilla wax), paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains a maximum of 500 g/l VOC.
STORABILITY
5 years and longer if stored dry and tightly closed. If thickened by frost, store at room temperature for 24-36 hours before use.PREPARATION
The wood surface must be clean, dry and frost-free (max. 18 % wood moisture content).
Osmo Hartwachs-Öl Original is ready to apply, do not dilute. Stir thoroughly.
Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste).
Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling.
The coating result depends, among other things, on the condition of the wood. For this reason, a test coat should always be applied, especially on unknown substrates.PROCESSING
Apply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil Colour Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly.
Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly.
When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.CLEANING THE TOOLSWith Osmo Brush Cleaner (aromatic-free).DRYING TIMEApprox. 8-10 hours (at standard climate, 23 °C/50 % rel. humidity). The drying time is longer at lower temperatures and/or higher humidity. Ensure good ventilation.The surface is fully cured after approx. 2-3 weeks.YIELD1 litre is sufficient for approx. 24 m2 with 1 coat.The coverage of the product depends largely on the condition of the existing wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage.NOTESOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation lead to drying delays.We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba etc.). Test coat recommended.Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours).Attention: Apply max. 1x thin coat with a cloth inside cupboards and drawers.Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop.For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required.If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.

Specifically geared to light-coloured wooden flooring – for a finish that does not enhance the tone of wood!Transparent, matt, for the interiorHighly recommended for solid wood floors, blockstrip, plankwood, OSB and cork flooring; also suitable for furniture and edge-glued panelsPolyx®-Oil Effect Natural preserves the natural character of wood.Number of coats: For floors, maximal one coat with Polyx®-Oil Effect Natural. A second coat is to be carried out with a clear Osmo Polyx®-Oil.Can sizes: 0.75 l; 2.5 l;1 litre covers approx. 30 m2 with 1 coat.Please note: the desired results of the colour tone may vary depending on the wood species.

For naturally beautiful worktops with a long service life. Suitable for:All types of stressed wooden surfaces such as kitchen countertops, table tops, furniture and much more. benefits> Fast drying (4 - 5 hours) - Complete coating in one day!> High yield - 1 liter is sufficient for 14 m² (3 jobs)> Environmentally friendly> Easy to use> Durable> Water and dirt repellent> Very easy to clean and maintain> Renovation possible without sanding! The optimal protection for permanently hard-wearing wooden surfaces. Worktops have to withstand a lot in everyday life: heat, cold, leftover food, a wide variety of liquids and then also sharp knives. In order to withstand all these stresses and strains, your wooden worktop needs optimal protection: our SAICOS worktop oil. Made from natural ingredients, it creates extremely hard-wearing and natural wooden surfaces with a long shelf life. The elasticity of the wood is retained and it is protected from the inside. SAICOS worktop oil dries within a few hours. Water and dirt repellent, it is the ideal product for long-lasting protection and maintenance of wooden surfaces that are exposed to regular loads. Surfaces in need of renovation can simply be painted over with SAICOS worktop oil without sanding after cleaning. Worktops made from exotic or thermally treated woods require a previous coating with SAICOS Extra Thin Priming Oil. processingSAICOS worktop oil is ready to use. Shake well - do not dilute.1. Apply the first application evenly and thinly with the SAICOS flat brush, the SAICOS oil / wax roller or a lint-free cloth. Note: Do not pour SAICOS worktop oil directly onto the surface, but work with a paint tray.2. Drying time: approx. 4 - 5 hours, depending on the temperature and humidity. Best processing temperature between 8 ° C and 35 ° C. Oxidative drying - ensure that windows are open and air can circulate well during and after processing.3. Intermediate sanding with Scotchpad P280.4. For the second order, see point 1.5. After a reaction time of 5 minutes, remove the excess material with a clean, lint-free cloth.6. Drying time: approx. 4 - 5 hours, see point 2.7. Third order like the first and second order. maintenanceEcoline Wipe Care Concentrate: for regular cleaningEcoline care wax: for refreshing care as requiredThe surfaces should be reworked annually or as required with a thin layer of SAICOS worktop oil to ensure optimal durability.