The UNIA system screw is used to fasten metal or plastic parts to wood, wood-like materials and aluminum profiles up to a wall thickness of 3 mm.The tip, which is designed as a drilling unit, ensures a reduced splitting effect and less surface tension. Length: 17 - 47 mmDiameter: 4.2 mm and 4.8 mm Head: cylinder head Ø 5.8 mm Drill point: suitable for wood and aluminiumDrilling capacity: Aluminium with approx. 3 mm wall thickness Drive: TX 20Material: hardened stainless steel / stainless steel A4 1.4401with black surface coating DESCRIPTIONUNIA is a stainless steel self-drilling screw with a cylindrical head shape for fastening metal or plastic parts to wood, wood-like materials and aluminum profiles up to a wall thickness of 3.0 mm.The drill tip, which is designed as a drilling unit, ensures a reduced splitting effect and reduces surface tensions e.g. with screw connections on the back in element construction.APPLICATIONFor fastening concealed fastening systems such as TIGA, DILA, SUPRO, PLATA, LIGO and ZONA.The suitability and compatibility of the UNIA system screws with the component to be connected and their substructure may have to be determined by the plank or facade strip manufacturer / supplier.MATERIAL1.4006 / X12Cr13 / AISI 410 hardened stainless steelOptionally with black surface coating [black zinc plated]

The FUGO spacer is the perfect complement for visibly screwed rhombus strips made of wood or wood-like materials. The specially shaped joint spacers between the individual rhombus boards create a uniform joint pattern and ensure a perfect look on wooden facades, privacy screens, fences, etc. Overview Joint spacer:Model 5 | 8 | 12Dimensions:L 45mm B 15 mm H 6 mmMaterial:PP polypropylene blackSpecial feature: for Rhombus boards from 15-30° inclination

Ideal for fences and screens. Quick, simple, straightforward and safe installation of fence posts. When mounting fence posts or railings, fitters have to struggle with inclined foundations. In order to position the posts in a straight and aligned manner, compensating plates have so far been used. With the fastener Pfalu, Sihga is now launching a system that does not need any additional plates. A part of the attachment can be already pre-assembled on the end of the posts. The second part is anchored on site in the subsoil of wood or concrete. After assembly of Pfalu, the post can be adjusted up to four degrees in all directions by means of easily accessible adjusting screws. A tensioned tension rod inside ensures the required stability. Pfalu has been tested by Sihga for design loads and is approved for posts from 90 mm diameter.

1 set is for one fence panel H 1,800 x W 1,800 mm = 3.24 m22 pcs TERA post connection profile PA2 pcs TERA stabilisation profile SP4 units TERA cover profile AP1 pc TERA end profile ASP10 UNIA1 screws, 4.2 x 28 mm hardened stainless steel, TX20200 UNIA1 screw, 4.2 x 17 mm hardened stainless steel, TX20Introducing the TERA fencing and privacy screen kit, designed for effortless customization of fences, wind or privacy screen elements. With the TERA PA Post Connection Profile, achieve a seamless transition from fence infill to post, enhancing the overall aesthetic appeal. Simply insert fence infills (e.g. rhombus mouldings or smooth-edged boards,) into the post connection profile and secure them in place. The generously sized mounting covers effectively mask any cut edges or length differences. Ensure stability with the slimline TERA SP Stability Profile, fitted between posts to prevent twisting of fence panels. Hide screw connections elegantly with the TERA AP Finishing Trim, adding to the system‘s visual appeal. Complete the look with the TERA ASP Top Cap Profile, providing a flawless finish and additional structural protection for the top fence infill board. Extend the end profile effortlessly with the optional extension set as needed. Overview Dimensions:TERA PA - Post Connection ProfileLength 1,800 mmPA 19 – 23 for fence infills from 19 – 23 mm  ǀ  PA 24 – 27 for fence infills from 24 – 27 mmTERA SP - Stability ProfileLength 1,800 mm  ǀ  Width 18 mm  ǀ  Height 8 mmTERA AP - Finishing TrimLength 1,800 mm  ǀ  Width 15 mm  ǀ  Height 4.5 mmTERA ASP - Top Cap ProfileLength 1,800 mmfor PA 19 – 23  ǀ  for PA 24 – 27 Material:Aluminium EN AW 6060 Surface:Silver anodised E6/EV1 or powder-coated RAL 7016 Accessories:FUGO Joint spacer 5 ǀ 8 ǀ 12 mm for rhombus mouldingsTERA ASP: Extension-set for fence widths over 1,800 mm