OSMO Spring Spatula 270 mm

Professional care for oiled wooden surfaces SAICOS Professional Care Oil is suitable for the first and additional coatings of oiled wooden floors made of hard- and softwood, parquet, wooden paving and industrial parquet.  Benefits For oiled wooden floors, parquet, wooden paving and industrial parquetFor the first and additional coatingsExtremely durableStain-resistantEasy careShake well before use. Professional Care Oil is applied with a spatula and ensures an open-pore, water-repellent and dirt-resistant surface. If necessary, partial areas can also be reworked. The tools should be cleaned with SAICOS Brush Cleaner - benzene free.

The future is solvent-free - our Ecoline Hardwax-Oil 2.0 also Pure nature in your living room – possible with our Ecoline Hardwax-Oil 2.0. Resistable, durable and also environmental gentle? Not feasable? Yes it is! With Ecoline Hardwax-Oil 2.0. The new solvent-free Ecoline Hardwax-Oil 2.0 combines the well-known, high SAICOS quality with the ecological requirements of our time. With its natural ingredients it creates a natural yet also extremely abrasion resistant wooden and cork surface which can be cleaned easily.  Benefits For all wooden and cork floors, tables and worktops as well as other heavily used wooden surfacesSolvent-free, natural, environmentally-friendlyExtremely durableStain-resistantOxidative drying The ecological wood coating for everyone Our wooden floor has to withstand a lot in everyday life. Food leftovers, children's toys, but also dirt and grime put a lot of strain on the expensive wooden and cork flooring. It is therefore particularly important to choose the coating carefully. With the Ecoline Hardwax-Oil 2.0 you combine perfect protection with ecological demands. And the best: It is solvent-free! Based on natural oils and waxes, you get an abrasion-resistant and extremely hard-wearing surface, which is also healthy and breathable. With its slip-resistant surface in accordance with R9, the well-known risk of slipping on wooden floors is reduced. And whoever thinks that such a floor is difficult to clean is wrong! A surface coated with Ecoline Hardwax-Oil 2.0 is dirt-repellent and therefore only needs to be wiped with a damp cloth.If at some point a renovation is necessary, this can be done without laborious sanding of the surface. Green, greener, Ecoline The future is green! Green like our Ecoline series. For years, the ecological footprint has been moving more and more into the consciousness of society. We had recognized this and developed the environmentally friendly Ecoline product line 10 years ago, which includes particularly sustainable products with a low solvent content. To complete the portfolio, the Ecoline series has even been supplemented with a completely solvent-free Hardwax-Oil. Additional Hardener 2K for special requirements For an even stronger surface quality, the additive Hardener 2K can be added to the Ecoline Hardwax-Oil 2.0. In this way, the treated surface becomes resilient and more wear-resistant earlier.The quantities in the tins exactly match the respective can contents of the Ecoline Hardwax-Oil 2.0 (0.75 L and 2.5 L).

For filling small joints!OSMO WOOD PUTTY is a clear polymer dispersion for filling cracks and joints in sanded wooden flooring or parquet. Extremely high filling strength, short drying times and good sanding properties create a quality product. Fugenkittlösung is combined with sanding dust, and thus it offers a big advantage in that it matches the colour of subsurface exactly.ADVANTAGES >  High filling power>  Quick drying>  Good sanding properties>  Low odour>  Sizes: 1.00 L; 5.00 L>  1 litre covers approx. 10-15 m².APPLICATIONBefore applying, stir well in a bucket so that any settlement is mixed in.Mix in sanding dust, best from the same type of wood with a grit 80-120, into thick paste (approx. 15 % weight increase by adding sanding dust).Fill in flooring diagonally with a stainless steel double blade scraper and at the same time press wood putty firmly into joints. Repeat process if necessary.After 30 – 60 minutes the dried paste can be sanded coarsely (grit P80) and afterwards finely sanded (grit P100 – 120) so that no wood putty is left on the surface of the parquet. In most cases, fine sanding with P100 – 120 is enough.Treatment with any oil-and-wax-based wood finish from Osmo can be carried out afterwards.Note: As wood putty mixture and application strongly depends on wood species and sanding dust, a trial application is absolutely necessary! Do not fill joints in sprung or plank flooring!